Справочник Пользователя для Kenwood DPF-3030
14
Programmed play (PGM mode)
Use the following procedure to program desired tracks in a
desired order. (up to 20 tracks)
desired order. (up to 20 tracks)
÷ Load a disc in the CD player.
@
Press so that the “PGM” indicator lights.
Program desired tracks.
1
2
Preparation
: Keys and control used in the operations described on this page.
÷ The programmed contents remain in memory.
To stop playback
Start playback.
3
÷ When the 4 or ¢ key is pressed during playback, the track will be
skipped in the direction of the pressed button.
÷ When the 4 key is pressed once during playback, the play position
returns to the beginning of the current track being played.
Lights up.
Displays the total playing time
of the programmed tracks.
of the programmed tracks.
÷ Up to 20 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
÷ If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
÷ When the total playing time of the programmed tracks exceeds 100
minutes, the remaining time on the disc will not be displayed any more.
2
Set the entry.
1
Select the desired track No.
Press the numeric keys as shown below....
To enter track No. 25:
To enter track No. 25:
005
Go to step
2 within 5 seconds.
3
Repeat steps
1 and 2 above.
Do this operation in the stop mode.
Displays the entered program No.
for a few seconds.
for a few seconds.
1
2
3
4
5
6
7
8
9
0
+10
0
7
6
4
¢
1
¡
0
0
0
0
0
7
6
P.MODE
1
2
3
4
5
6
7
8
9
0
+10
P.MODE
TRACK
NO.
PGM
0 1
TRACK
NO.
0 2
P _ 0 1
TRACK
NO.
TOTAL TIME
0
_
:
2
1 6 4 2