Справочник Пользователя для Marantz CD5003

Скачать
Страница из 38
30
BASIC 
CONNECTIONS
BASIC 
OPERA
TIONS
ADV
ANCED 
CONNECTIONS
ADV
ANCED 
OPERA
TIONS
TROUBLESHOOTING
NAMES AND 
FUNCTIONS
TROUBLESHOOTING
OTHERS
ENGLISH
TROUBLESHOOTING
In a case of trouble, check the items below. Incorrect operations can sometimes be taken for trouble and 
malfunctions.  If the trouble persists even after the following points have been checked, consult your dealer 
or nearest Marantz sales office or service center.
Symptoms
Causes
Action
A disc does not rotate.
The power cable is not plugged 
in.
Plug the power cable into an AC outlet. 
(page 9)
The power to this unit is not 
turned on.
Turn on the power to the unit.
(page 10)
The disc is not placed correctly.
Place the disc correctly.
(page 10)
The disc is placed upside-down. 
(The label of the disc is facing 
down.)
Place the disc correctly.
(page 10)
The disc is dirty.
Clean the recorded side of the disc. (page 
33)
The disc is scratched.
A disc with many scratches may not be 
playable. (page 33)
The disc is warped.
A warped disc may not be playable. 
(page 33)
The disc rotates, but there 
is no sound output.
An amplifier or speakers are not 
connected correctly.
Connect the cables correctly. (Refer to 
User Guide supplied with the amplifier.)
The power to the amplifier is not 
turned on.
Turn on the power to the amplifier.
(Refer to User Guide supplied with the 
amplifier.)
The function or the selector 
switch of the amplifier is not set to 
“CD” or “AUX” (according to your 
current connection setup).
Set the function or the selector switch of 
the amplifier to “CD” or “AUX” (as per your 
connection setup).
(Refer to User Guide supplied with the 
amplifier.)
The volume of the amplifier is set 
to minimum.
Adjust the volume of the amplifier. (Refer to 
User Guide supplied with the amplifier.)
The disc stops rotating.
The disc is dirty.
Clean the recorded side of the disc. (page 
33)
The disc is scratched.
A disc with many scratches may not be 
playable. (page 33)
The disc is warped.
A warped disc may not be playable. (page 
33)
The disc to be played is not a 
music CD. Or MP3/WMA files are 
not recorded on the disc.
A CD-ROM for a computer cannot be 
played. (page 32)
Symptoms
Causes
Action
The remote controller 
cannot be operated.
The distance between the unit 
and a remote controller is too 
great.
Use the remote controller nearer the unit, 
within the operational range. (page 4)
Some object is placed between 
the unit and remote controller.
Remove the object. (page 4)
The batteries in the remote 
controller are exhausted. 
Replace all the batteries with new ones. 
(page 4)
The remote sensor of the unit is 
exposed to strong light.
Avoid exposing the remote sensor to the 
strong light. (page 4)
T h e   R E M O T E   C O N T R O L 
switch on the rear panel is set to 
EXTERNAL.
When the unit is to be used alone, set the 
switch to INTERNAL. (page 13)
A   C D - R / C D - RW   d i s c 
cannot be played.
The disc is placed upside-down.
Place the disc correctly. (page 10)
The recorded information is not 
in a music (CD-DA) format. Or 
MP3/WMA files are not recorded 
correctly.
Record correct data appropriate for the 
unit. (page 32)
Pitch control operation 
cannot be performed.
The unit is not set to Audio EX 
OFF.
Set the unit to Audio EX OFF. (page 24)
Digital signals are not 
output.
Digital output is set to OFF.
Set digital output to ON. (page 24)
Audio EX is set to Audio EX2.
Set Audio EX to Audio EX1. (page 24)
Audio EX is set to Audio EX OFF, 
and the pitch control is used.
Set the pitch control setting to O. (page 21) 
Or set Audio EX to Audio EX1. (page 24)
CD5003_U_01_ENG.indd   30
CD5003_U_01_ENG.indd   30
08.6.19   8:22:14 AM
08.6.19   8:22:14 AM