Листовка для American Standard 730236-100

730236-100 Rev. D

NOTE:  

Pictures may not exactly define contour of china and components.

Introduction: Thank you for selecting our products...products which have been the benchmarks of fine quality for 
years.  To help insure that the installation process will proceed smoothly, please read these instructions carefully 
before you begin.  Also, review the recommended tools and materials list; carefully unpack and examine your new 
plumbing fixture.

 

© American Standard Inc. 2003

Using the template provided,locate the position of 
thesink. Provide proper clearance under the 
countertop for the faucet supply lines, drain assembly 
and the structural parts of the cabinet.

NOTE: If replacing an existing sink be certain to shut 
off water supply before removing old sink.

Drill a clearance hole 
inside the perimeter 
line of the template.

Cut opening around the 
perimeter of the 
template.

Mount the faucet and drain assembly (not included) 
on the sink following faucet manufacturer's 
instructions. Be certain to apply a bead of sealing 
putty on the underside of the drain (Part "A") in order 
to ensure a watertight seal between the sink and 
drain. Remove excess putty after installing drain on 
sink.