Листовка для American Standard 7100.2XX

FLEXIBLE

INLET HOSES

RECESS

34440 REV. 1.4

Connect hot or cold water supply lines to shank using
sealant, appropriate connectors, and coupling nuts.

SHANK

SUPPLY

NUT

RECESS

Assemble the SPOUT 

and tighten the

SPOUT NUT 

until snug on VALVE BODY.

Remove AERATOR.
With handle in OFF position, turn on water supplies
and check all connections for leaks.

Operate both handles to flush water lines thoroughly.
Checkspout mounting and hose connections for leaks.

Turn handles into OFF position and replace AERATOR.

To change direction of handle rotation, 
proceed as follows:

Turn valve to OFF position.
Remove INSERT and HANDLE SCREW.
Slip HANDLE with ADAPTER off.
Remove SPRING CLIP (1).
Lift STOP WASHER (2), turn 90

° and replace.

Replace SPRING CLIP (1).
Replace ADAPTER, HANDLE, SCREW, and INSERT.

AERATOR may accumulate dirt causing distorted and reduced
water flow. Remove AERATOR and rinse clean.
If spout drips, operate handles several times from OFF to ON
position. Do not force - handles turn only 90

°.

Plastic SCREEN (3) in CARTRIDGE (4) may accumulate
dirt causing reduced water flow. To clean, first turn
off hot and cold water supplies, then:

Remove INSERT and HANDLE SCREW.

Slip HANDLE with ADAPTER off.
Unscrew CARTRIDGE (4) with wrench.
Thoroughly rinse plastic SCREEN (3) at
base of CARTRIDGE (4).
Replace CARTRIDGE (4) until flange is 

tight against valve body.

Turn valves OFF.

Replace ADAPTER, HANDLE, SCREW,

and INSERT.

90

°

Place RUBBER RING 

in recess of fitting.

Insert inlet hoses (on model 7190.132 only) and

THREADED SHANK through hole of sink making
certain RUBBER RING 

is properly seated in the

recess of the fitting base.

Assemble GASKET 

, BRASS WASHER 

, and

LOCKNUT 

onto the THREADED SHANK from

underside of sink deck.
Tighten the LOCKNUT 

securely.

Connect the hot water supply to the left inlet hose
and the cold water supply to the right inlet hose
using appropriate connectors.

Remove LOCKNUT 

, BRASS WASHER 

, and

GASKET 

from fitting.