Справочник Пользователя для American Standard 710007-100

7 1 0 0 0 7 - 1 0 0

2

Determine side at which the door will pivot (left or right).
The pivot side should be opposite the showerhead. 

Measure width of the opening at the centerline of bottom.

NOTE: This door swings out only. Verify door will clear any 
obstructions before installing. 

Position pivot plate on threshold with undrilled end of plate 
toward pivot jamb. 

Bolt pivot plate in place using pivot bolt and 1/4" nut.

Mount threshold to pivot jamb using three #8 x 1/2" pan 
head screws. The wide side of the pivot jamb fits inside 
front lip of the threshold.

Flat edge of threshold should face inside of shower. 

Identify end of threshold which will be pivot side. 

Mark the OPPOSITE end for drilling. Cut threshold to size 
W measured in step 1. 

Attach top pivot arm to top of the pivot jamb using three #8 
x 5/8" Phillips head screws. (Ensure pivot jamb fits in slot in 
pivot arm).

#8 x 5/8" Flat Head Screw (Actual Size)

Position assembled pivot jamb to wall with threshold 
centered on the shower base. 

Mark holes in jamb for drilling. 

Use a level to ensure jamb is plumb.

W

MEASURE

TOP VIEW

CENTERLINE

IMPORTANT:
ENSURE
BASE IS LEVEL

FLAT EDGE

THRESHOLD

CUT END
OPPOSITE 
PIVOT SIDE

PIVOT JAMB

(AT THIS END)

PIVOT BOLT & NUT (ACTUAL SIZE)

UNDRILLED END

#8 x 1/2" PAN HEAD SCREW (ACTUAL SIZE)

(VIEW FROM 

INSIDE SHOWER)

WIDE SIDE OF 

PIVOT JAMB

THRESHOLD

LEVEL

PIVOT SLOT

PIVOT ARM

PIVOT JAMB

Record Measurement: W = ____________ inches

For best results use a 32-tooth hacksaw blade and a 
miter box.