Справочник Пользователя для American Standard 4114.1

Certified to comply with ANSI A112.18.1M

P U T T Y

S P O U T   B A S E

S I N K   O R

M O U N T I N G

S U R FA C E

M 9 6 8 4 7 0   R E V.  1. 4

Assemble RUBBER WASHER (4), BRASS WASHER (5), and threaded LOCKNUT (6) onto SHANK (3) from underside
of sink or mounting surface. Hand tighten LOCKNUT (6) and check that rotation of HANDLE (7) from HOT to COLD
is centered.

Use a screwdriver to tighten SCREWS (8) on LOCKNUT (6). Work your way around LOCKNUT (6), tightening 
the screws slightly each time until all are snug to ensure even pressure.

(A) Installation with ESCUTCHEON (1). Apply a bead of putty to bottom edge of ESCUTCHEON with PUTTY PLATE (1). 

Insert supply HOSES (2) and SHANK (3) through hole of ESCUTCHEON with PUTTY PLATE (1) and mounting surface.

 

Follow mounting instructions below to secure faucet to mounting surface.

(1). Discard ESCUTCHEON with PUTTY PLATE (1). 

Insert supply HOSES (2) and 

SHANK (3) through mounting hole and 

seat SPOUT BASE onto sink or mounting surface. 

Do not use putty.

Plumbers' Putty or Caulking

Adjustable Wrench

Phillips Screwdriver

Regular Screwdriver