Справочник Пользователя для American Standard 641

3

7 3 0 1 3 5 4 - 1 0 0   R e v .   B

Connect trap to drain assembly hand tight to 
check alignment. It may be necessary to cut 
off part of the tailpiece (area “B”) or part of the 
horizontal leg of the trap (area “C”). Secure 
joints for watertight assembly. 

Connect supply line to faucet (finger tight) and 
carefully bend tubes to engage with the 
supply shut-off valves. Tighten connections at 
faucet and shut-off valves for secure seal.

Shut-Off Valves

• Place the sink temporarily on the vanity to  
  check for alignment and clearance

Mounting on Furniture:
Assemble vanity as per instructions.

After checking fit and alignment, turn sink upside down 
and apply a generous portion of silicone adhesive 
around the under side of the rim near the edge. Place 
sink in position. Wipe off excess adhesive.

Mount the faucet and drain assembly (not included) on 
the sink following the manufacturer’s instructions. Be 
certain to apply a bead of sealing putty on the 
underside of the drain (Part “A”) in order to ensure a 
watertight seal between the sink and drain. Remove 
excess putty after installing drain on sink.

Use the mounting holes on the rear of the lavatory 
to secure the sink to the wall.