Справочник Пользователя для American Standard M968582

M 9 6 8 5 8 2   R E V. 1. 1

Certified to comply with ANSI A112.18.1M

Plumbers' Putty or Caulking

Adjustable Wrench

Phillips Screwdriver

Channel Locks

Make certain the SEAL (1) is properly seated in recess

of faucet body.

Insert supply HOSES (2) and SHANK (3) through center

hole of sink or mounting surface.

Assemble RUBBER WASHER (4), PLASTIC WASHER (5),

METAL WASHER (6) and threaded LOCKNUT (7) onto

SHANK (3) from underside of sink or mounting surface.

Hand tighten LOCKNUT (7) and check that faucet is centered.

Use a screwdriver to tighten SCREWS (8) on LOCKNUT (7).

Work your way around LOCKNUT (7), tightening the screws

slightly each time until all are snug to ensure even pressure.

Tubing Cutter

RECESS