Справочник Пользователя для American Standard 2443

7 3 0 5 2 9 - 10 0   Rev.  U

P r o d u c t   n a m e s   l i s t e d   h e r e i n   a r e   t r a d e m a r k s   o f   A S   A m e r i c a ,   I n c .
©   A S   A m e r i c a ,   I n c .   2 0 11

Putty Knife 

 

Regular Screwdriver  

   

Adjustable Wrench    

Sealant 

Hacksaw 

 

Wax Ring/Gasket 

 

 

Flexible Supply Tube 

1/2" Deep Well Nut Driver or

Closet Bolts 

 

Tape Measure 

 

 

Carpenters Level 

  

Deep Well Socket Wrench

NOTE: Pictures may not exactly define contour of china and components.

Recommended fitting type for back-to-back installations.

D

epending upon your plumbing and venting conditions, the flow from 

the Champion in a back-to-back installation may create a vacuum on 
the system and draw water from the opposing bowl. The National 
Standards Plumbing Code prohibits the use of a cross fitting for 
drainage as throw over is possible. The code does approve a 
directional "Y" style fitting with proper venting to direct the water 
downward and away from the other toilet.

 4 2-piece Toilets

 4 2-piece Toilets 

a.  Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b.  Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply!
c.  Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d.  Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
     NOTE: Mounting surface must be clean and level

!