Инструкции Для Сборки для Axor 16513XX1

3

For best results, Hansgrohe recom-

mends that this unit be installed by a 

licensed, professional plumber.
Please read over these instructions 

thoroughly before beginning instal-

lation.  Make sure that you have all 

tools and supplies needed to complete 

the installation.
This faucet may be used with a con-

tinuous flow water heater as long as 

the flow pressure is at least 14.5 psi.

•

•

•

Max. flow rate 

2.2 gpm

Max. water pressure 

145 psi

Recommended pressure: 

14.5 - 72 psi

Max. hot water temperature: 

176° F

Recommended hot water temp. 

120°F - 140°F*

Hole size in mounting surface 

  valve 

1 1/4"

  spout 

1 3/8"

Maximum mounting surface depth  1 5/8"

Requires 1/2" supply lines and nuts.

Bidet faucet not for use on vertical spray bidets.

*Please know and follow all applicable local codes when setting 

the temperature on the water heater.

Remove the mounting ring with o-ring and stop 

ring from the valve body.  
Push the valve up through the hole in the mounting 

surface.  
Install the stop ring on the valve.  Install the 

mounting ring -- it will stop at the proper mounting 

height.  

Rest the valve on the mounting surface.  
Tighten the mounting nut and the tensioning 

screws.