Справочник Пользователя для Pioneer KEH-P4020

Multi-CD Player

Audio Adjustments

1 Select the repeat range.
Refer to Repeating play on page 14.

2 Press and hold

PAUSE/SCAN for about two

seconds

to turn scan play on.

DSCN

(scanning tracks) or

SCAN

(scanning

discs) appears in the display. The first 10 sec-
onds of each track of the present disc (or the
first track of each disc) is played.

3 When you find the desired track (or disc)
press and hold

PAUSE/SCAN for about two sec-

onds

to turn scan play off.

The track (or disc) will continue to play.

Note

• After track or disc scanning is finished, nor-

mal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the
CD.

1 Press

PAUSE/SCAN

to turn pause on.

PAUSE

appears in the display. Play of the cur-

rent track pauses.

2 Press

PAUSE/SCAN

to turn pause off.

Play will resume at the same point that you
turned pause on.

Introduction of audio
adjustments

AUDIO

display

Shows the audio adjustments status.

LOUD

indicator

Appears in the display when loudness is
turned on.

Press

AUDIO

to display the audio function

names.
Press

AUDIO

repeatedly to switch between the

following audio functions:

FAD

(balance adjustment)—

EQ-L

(equalizer)—

LOUD

(loudness)—

FIE

(front image

enhancer)—

SLA

(source level adjustment)

• When selecting the FM tuner as the source,
you cannot switch to

SLA

• To return to the display of each source, press

BAND

Note

• If you do not operate the audio function within

about 30 seconds, the display is automatically
returned to the source display.