Справочник Пользователя для Mitsubishi Electronics QJ71DN91
7 - 4 7 - 4
MELSEC-Q
7 PROGRAMMING WHEN EXECUTING THE MASTER FUNCTION
7.3 Setting Parameters
This section explains examples of program for setting parameters.
If GX Configurator-DN is used, the programs described in Section 7.3.1 through
Section 7.3.3 will not be required.
7.3.1 Parameter settings using the sequence program
The following shows a method for setting parameters using the sequence program.
Command for setting the parameters
for the master function
for the master function
Sets the node number of the
first slave node to 1 and the
message group to 3.
first slave node to 1 and the
message group to 3.
Sets the connection type of the
first slave node to polling.
first slave node to polling.
Input byte module = 1,
output byte module = 0
Input word module = 0,
output word module = 0
Input double-word module = 0,
output double-word module = 0
output byte module = 0
Input word module = 0,
output word module = 0
Input double-word module = 0,
output double-word module = 0
Expected packet rate default = 500 ms
Watchdog timeout action default
= timeout
= timeout
Production inhibit time
default = 10 ms
default = 10 ms
Sets the station number of the second
slave node to 2 and the message
group to 3.
Sets the connection type of the
second slave node to polling.
slave node to 2 and the message
group to 3.
Sets the connection type of the
second slave node to polling.
Input byte module = 0,
output byte module = 1
Input word module = 0,
output word module = 0
Input double-word module = 0,
output double-word module = 0
output byte module = 1
Input word module = 0,
output word module = 0
Input double-word module = 0,
output double-word module = 0
Expected packet rate
default = 500 ms
default = 500 ms
Watchdog timeout action
default = timeout
Production inhibit time
default = 10 ms
default = timeout
Production inhibit time
default = 10 ms