Справочник Пользователя для Conair UGE014/0999

Water/Spray Tanks

UGE014/0999

The standard WT.ST tanks are designed for use with city,
tower or chilled water supplies. You may choose to treat the
water to prevent algae build-up.

to the 1

1

/

2

-inch

NPT fitting on the tank.

to the fitting

on the tank air wipe compartment.

Do not use deionized water, brine

or other corrosive water mixtures for the main water
supply unless your tank has been specially designed
for such mixtures. Consult a water treatment special-
ist for the best way to prevent algae build-up without
damaging the equipment.

You can connect a chiller to the tank’s optional heat exchang-
er to remove heat from the extrudate more efficiently.
Typically, the tank comes with the 3/4 inch lines of the stan-
dard tube and shell heater plumbed to the tank’s water mani-
fold. The 1

1

/

2

inch inlet and outlet of the heat exchanger can

be used for the chiller.

Connect the chiller “To Process” and “From Process” lines to
the largest NPT fittings in the shell of the heat exchanger.

Connect the chiller “To Process” and “From Process” lines to
the smallest NPT tube ends of the heat exchanger.

TIP: If you have a water
supply with high mineral
content, connect the chiller
to the tube ends of the
heat exchanger.

From chiller

To chiller

To water manifold

From water
pump

From chiller

To chiller

To water manifold

From water pump