Справочник Пользователя для Eureka 3690

PROBLEM SOLVING

NOTE: Turn OFF the power switch and unplug the electrical cord before servicing.

PROBLEM

CAUSE

SOLUTION

Motor won’t start

Electric plug

Power switch not
turned “ON”

Full dust cup

Hose

Clogged or dirty
filter.

Canister lid not
latched

Full dust cup

Slip ring open

Hose

Clogged or dirty
filter.
Internal safety
thermostat trips

Assembly or
related
attachments

Push plug securely into
outlet.

Try another outlet.

Check circuit breaker.

Make sure power switch is
“ON.”

Empty dust cup.

Remove any clogs from
hose that restrict airflow,
then try again.

Check filter. If dirty, clean or
replace with a new filter.

Push canister lid until it
latches firmly.

Empty dust cup.

Rotate slip ring on wand
until hole is covered.

Remove any clogs from
hose that restrict airflow,
then try again.

Check filter. If dirty, clean or
replace with a new filter.

Unplug cleaner and check
for obstructions in hose,
wands and attachments.

Check for full dust cup.

Call 1-800-282-2886
between 7:00 AM-8:00PM
central standard time.

Know the Model number
and Serial number when
you call.

No suction at end of
hose

Reduced suction

Cleaner shuts off

General questions