Справочник Пользователя для Yamaha R-S700BL

Use D / E (to select a digit to edit) and B / C 
(to select a number) on the remote control to 
enter the 4-digit code number.
• If you are entering a code number for the first time, 

enter the desired code number.

• If you have entered a code number before, enter the 

same code number.

y

You can also enter the code number using the numeric buttons on 
the remote control.

y

If the code number was entered for the first time, a confirmation 
message is displayed. Press ENTER again to confirm the code 
number.

The SIRIUS channel number and channel name are 
displayed on the front panel display.

• If a code number is already registered and you enter a different 

number, “WRONG” is displayed and the display returns to step 
3. Enter the correct code number.

• If you forget the Parental lock code or want to change it, reset it 

using “SR PIN” (see page 43).

Search for a channel to be locked or 
unlocked.
For details on searching channels, refer to the 
following pages.
• All channel search mode (see page 29)
• Category search mode (see page 29)

When searching for a channel, the sound of the selected channel 
can be heard even if the channel is locked.

Press ENTER on the remote control to lock 
or unlock the selected channel.
• If the selected channel is locked, the channel 

number and “LOCKED” are displayed on the front 
panel display.

• If the selected channel is unlocked, the front panel 

display changes from “LOCKED” to the channel 
name.

Press OPTION once or press RETURN 
repeatedly on the remote control to exit the 
“Parental Lock”.
• If the last channel you selected was locked, the unit 

tunes in to “184 Weather/Emergency” or “000 
SIRIUS ID”.

• If the last channel you selected was unlocked, the 

unit tunes in to that channel.

■ Tuning in to the locked channels

Tune in to the channel using direct number access mode 
(see page 30) or preset search mode (see page 31). When 
you tune in to a locked channel “LOCKED” is displayed 
on the front panel display, followed by the following 
message. Enter the Parental lock code set previously by 
using the numeric buttons on the remote control. To cancel 
this operation, press ENTER on the remote control.

If the number you entered does not match the code number, 
“WRONG” is displayed on the front panel display and this unit 
tunes in to the previously selected channel.

The entered code number is needed for tuning in the 
channel or unlocking the channel. Write it down below.
Code number: ________________________________