Справочник Пользователя для Yamaha R-S700BL

■ Playing back Bluetooth

When pairing is complete, carry out the following 
procedure to achieve a wireless connection between this 
unit and the Bluetooth component. 
When the wireless connection is complete, you can enjoy 
playback from Bluetooth components.

Depending on the Bluetooth component, a wireless connection is 
established automatically or when the Bluetooth component is 
operated. In these cases, it is not necessary to carry out the 
following procedure.

Press OPTION on the remote control.
The Option menu for DOCK displayed (see page 40).

Press B / C on the remote control to select 
“Connect”, and then press ENTER.
When wireless connection is complete, “Connected” 
is displayed on the front panel display.
To exit the Option menu, press OPTION on the 
remote control.

“Not found” is displayed if there is a connection error. Check that 
the following conditions have been satisfied, and try to establish a 
wireless connection again.
• Both this unit and the Bluetooth component are paired.
• The Bluetooth component is switched on.
• The Bluetooth component is within 32 feet/10 meters of the 

Bluetooth wireless audio receiver.

Operate the Bluetooth component for 
playback.
While the Bluetooth component is playing, 
“BLUETOOTH” is displayed on the front panel 
display. 

To disconnect a wireless connection, repeat these steps and select 
“Disconnect” in step 3.

y

When the input source is set to DOCK, you can also establish a 
wireless connection by pressing MEMORY on the front panel (or 
ENTER on the remote control).

B / C
ENTER