Справочник Пользователя для Yamaha RX-A2010

En

Configures the settings related to HDMI.

■ 

Enables/disables HDMI Control (p.150).

• To use HDMI control, you need to perform the HDMI Control link setup (p.150) after connecting HDMI 

Control-compatible devices.

❑ TV Audio Input

Selects an audio input jack of this unit to be used for TV audio input when “HDMI 
Control” is set to “On”. The input source of this unit automatically switches to TV audio 
(input jack selected in here) when the TV input is switched to its built-in tuner.

Settings
AUDIO1~4

Default
AUDIO1

• When using ARC to input TV audio to this unit, you cannot use the input jacks selected in here for 

connecting an external device because the input will be used for TV audio input.

❑ ARC

Enables/disables ARC (p.29) when “HDMI Control” is set to “On”.

• You do not need to change this setting normally. In case noises are produced from the speakers connected 

to this unit because TV audio signals input to this unit via ARC are not supported by this unit, set “ARC” to 
“Off” and use the TV speaker.

❑ Standby Sync

Select whether to set this unit to standby in conjunction with TV power-off when “HDMI 
Control” is set to “On”.

Off (default)

Disables HDMI Control.

On

Enables HDMI Control.
Configure the settings in “TV Audio Input”, “ARC” and 
“Standby Sync”.

Off

Disables ARC.

On (default)

Enables ARC.

Off

Does not set this unit to standby mode in conjunction with TV 
power-off.

On

Sets this unit to standby mode in conjunction with TV power-
off.

Auto (default)

Sets this unit to standby mode in conjunction with TV power-off 
only when this unit is receiving TV audio or HDMI signals.