Справочник Пользователя для Yamaha RX-A2010
En
120
■
Zone Rename
Changes the zone names displayed on the front display or TV screen.
■
Setup procedure
1
Use the cursor keys to select a zone to be renamed and press ENTER.
2
Press ENTER, use the cursor keys to rename, and then press ENTER again.
3
Use the cursor keys to select “OK” and press ENTER.
• To clear the entry, select “CLEAR”.
4
To exit from the menu, press ON SCREEN.
Function
Configures the functions that make this unit easier to use.
■
Auto Power Down
Sets the amount of time for auto-standby. If you do not operate this unit for the specified
time, this unit will automatically go into standby mode.
time, this unit will automatically go into standby mode.
Settings
■
Input Assignment
Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input
source.
source.
■
Setup procedure
Example: assigning the OPTICAL (e) jack to the input source “AV2”
1
Use the cursor keys to select the cell at the intersection of “AV2” and “Optical”, and
press ENTER.
press ENTER.
2
Use the cursor keys to select “e” and press ENTER.
3
To exit from the menu, press ON SCREEN.
• You cannot assign both COAXIAL and OPTICAL jacks to the same input source.
Off (default)
Does not set this unit to standby mode automatically.
4 Hours, 8 Hours,
12 Hours
12 Hours
Sets this unit to standby mode when you have not operated this unit for the
specified time.
specified time.