Справочник Пользователя для Yamaha RX-V1600
CONTROLS AND FUNCTIONS
7
INTR
ODUCTION
8 Front panel display
Shows information about the operational status of this
unit.
Shows information about the operational status of this
unit.
9 PRESET/TUNING (EDIT)
Switches the function of PRESET/TUNING/CH l / h
between selecting preset station numbers and tuning when
TUNER is selected as the input source (see pages 46 to
51).
Switches the function of PRESET/TUNING/CH l / h
between selecting preset station numbers and tuning when
TUNER is selected as the input source (see pages 46 to
51).
0 FM/AM
Switches the reception band (FM or AM) when TUNER is
selected as the input source (see page 46).
Switches the reception band (FM or AM) when TUNER is
selected as the input source (see page 46).
The frequency of the previously received station is automatically
recalled.
recalled.
A MEMORY (MAN’L/AUTO FM)
Stores a station in the memory when TUNER is selected
as the input source. Hold down for more than 3 seconds to
start automatic preset tuning (see page 47).
Stores a station in the memory when TUNER is selected
as the input source. Hold down for more than 3 seconds to
start automatic preset tuning (see page 47).
B TUNING MODE (AUTO/MAN’L), DISPLAY
Switches the tuning mode between automatic (the AUTO
indicator is turned on) and manual (the AUTO indicator is
turned off) when TUNER is selected as the input source.
Switches the tuning mode between automatic (the AUTO
indicator is turned on) and manual (the AUTO indicator is
turned off) when TUNER is selected as the input source.
C STRAIGHT (EFFECT)
Turns the sound field programs on or off. When
STRAIGHT is selected, 2-channel or multi-channel input
signals are output directly from the respective speakers
without effect processing.
Turns the sound field programs on or off. When
STRAIGHT is selected, 2-channel or multi-channel input
signals are output directly from the respective speakers
without effect processing.
D Remote control sensor
Receives infrared signals from the remote control.
Receives infrared signals from the remote control.
E TONE CONTROL
Use to adjust the balance of bass and treble for the front
left and right and center channels (see page 38).
Use to adjust the balance of bass and treble for the front
left and right and center channels (see page 38).
F PURE DIRECT
Turns on or off the PURE DIRECT mode (see page 41).
Turns on or off the PURE DIRECT mode (see page 41).
The indicator around the button lights up when the unit is in the
PURE DIRECT mode.
PURE DIRECT mode.
G OPTIMIZER MIC jack
Use to connect the supplied optimizer microphone to run
AUTO SETUP (see page 32).
Use to connect the supplied optimizer microphone to run
AUTO SETUP (see page 32).
H SPEAKERS A/B
Turn on or off the set of front speakers connected to the
SPEAKERS A and/or B terminals on the rear panel each
time the corresponding button is pressed.
Turn on or off the set of front speakers connected to the
SPEAKERS A and/or B terminals on the rear panel each
time the corresponding button is pressed.
I
PHONES (SILENT CINEMA) jack
Outputs audio signals for private listening with
headphones.
headphones.
• When you connect headphones, no signals are output at the
PRE OUT jacks or to the speakers.
• All Dolby Digital and DTS audio signals are mixed down to 2-
channel stereo (front left and right channels).
J VIDEO AUX jacks
Input audio and video signals from an external source such
as a game console. To reproduce source signals at these
jacks, select V-AUX as the input source.
Input audio and video signals from an external source such
as a game console. To reproduce source signals at these
jacks, select V-AUX as the input source.
K MULTI ZONE buttons
This button is operational only when MASTER ON/OFF is
pressed inward to the ON position.
pressed inward to the ON position.
This button is operational only when MASTER ON/OFF is
pressed inward to the ON position.
pressed inward to the ON position.
ZONE CONTROL
Switches the zone you want to control between the
main unit, Zone 2 and Zone 3 (see page 106).
After you press ZONE CONTROL, the indicator for
the currently selected zone flashes in the front panel
display for approximately 5 seconds. While the
indicator is flashing, perform the desired operation.
Switches the zone you want to control between the
main unit, Zone 2 and Zone 3 (see page 106).
After you press ZONE CONTROL, the indicator for
the currently selected zone flashes in the front panel
display for approximately 5 seconds. While the
indicator is flashing, perform the desired operation.
L PROGRAM selector
Use to select sound field programs or adjust the balance of
bass and treble in conjunction with TONE CONTROL.
Use to select sound field programs or adjust the balance of
bass and treble in conjunction with TONE CONTROL.
M VOLUME
Controls the volume level of all audio channels.
Controls the volume level of all audio channels.
This does not affect the OUT (REC) level.
Note
Note
Notes
Note
Note
Note