Справочник Пользователя для Yamaha RX-V557

The supplied remote control can be used to control Zone 
2. You can even select the input source and control 
components located in the main room directly from the 
second room regardless of the listening condition in the 
main room.

y

You can also turn on/off the main or Zone 2 mode by pressing 

MAIN

 or 

ZONE 2

 on the front panel.

■

The TRANSMIT indicator on the remote control 
flashes twice.

Immediately after you have configured the remote 
control for Zone 2, the remote will enter main mode. 
When the remote is in main mode, you can turn the 
main unit on, or set it in standby mode independently 
of Zone 2 by pressing SYSTEM POWER or 

STANDBY.

• If you enable Zone 2, the Zone function is applied to the current 

remote control ID (ID1: default code, ID2: alternative code).
However, because the remote control codes for Zone 2 are 
common to ID1 and ID2, the remote control ID does not change 
even if it is switched.

• To release ZONE 2, clear the remote control code set for 

, 

or set a remote control code other than a 

TV code for 

.

■

The TRANSMIT indicator on the remote control 
lights up while the remote control is in Zone 2 mode.

y

Zone 2 volume cannot be adjusted with the remote control. Use 
the control on the amplifier in the second room.

The remote control returns to the main mode 10 seconds after you 
press 

, or if you press any button other than SYSTEM 

POWER, STANDBY, MUTE or the input selector buttons. If the 
TRANSMIT indicator is turned off, press 

 to set the remote 

control to Zone 2 mode before turning Zone 2 power on or off, 
changing the input source, or muting the sound.