Справочник Пользователя для Yamaha RX-Z7

Press G

ID repeatedly using a ballpoint pen or 

similar object on the remote control to select the 
desired remote control ID.
Each time you press GID, the remote control ID indicator 
changes as shown below.

y

To set the remote control ID of the simplified remote control, 
see page 123 for details.

■ SIRIUS Satellite Radio Parental Lock 

SIRIUS PIN

Use this feature to set the code number for the SIRIUS 
Satellite Radio Parental Lock feature to the initial factory 
setting.

■ Bi-amplifier mode

BI-AMP

Use this feature to activate or deactivate the bi-amplifier 
function.

When “BI-AMP” is set to “ON”, the SURROUND BACK 
terminals cannot be used to connect surround back speakers in 
that the terminals are already used for the bi-amplifier 
connection (page 19) and the presence speaker output is 
disabled.

■ Pre-amplifier mode

PREAMP MODE

Use this feature to select whether you use this unit as the 
preamplifier in the main zone.

y

This setting does not affect the amplifier assignments for the 
other zones (SP1 and SP2).

■ Recovery and backup of the system 

RECOV./BACKUP

Use this feature to save and restore the settings of this unit.

• This unit does not save the FM/AM preset stations, preset USB/

network items, and system memory settings.

• If no settings are saved, you cannot select “RECOVERY”.

■ Parameter initialization

INITIALIZE

Use this feature to reset the parameters of this unit to the 
initial factory settings. You can select the category of 
parameters to be initialized.

y

To initialize the parameters of each sound field program, use 
“Initialize” in “Stereo/Surround” (page 89).

■ MAC address filter

MAC FILTER

Use this feature to filter the access to this unit via LAN to 
control this unit by the MAC address of the accessing PC 
(page 112).

y

You can register the MAC address that is allowed to access 
when “MAC FILTER” is set to “ON” by using the Web browser 
(page 112).

RESET

Sets the code number to the initial factory setting.

Cancels the reset of the code number.

ON

Select this setting if you want to activate the bi-
amplifier function.

Select this setting if you want to deactivate the bi-
amplifier function.

ON

Select this setting when you use this unit as the 
preamplifier in the main zone. The audio signals 
for the main zone are only output at the PRE OUT 
jacks of this unit.

Select this setting to use the internal amplifiers of 
this unit for the main zone.

RECOVERY

Restoring the saved setting of this unit.

BACKUP

Saves the current settings of this unit.

Cancels the recovery or backup of the settings of 
this unit.

DSP 
PARAM

Select this setting to initialize all the parameters of 
the sound field parameters (page 85).

VIDEO

Select this setting to initialize all the parameters in 
“Video” and “Display Set” (except “Short 
Message” and “Playback Screen”).

NETWORK

Select this setting to initialize all the parameters in 
“Network” and MusicCAST information stored in 
this unit.

ALL

Select this setting to initialize all the parameters of 
this unit.

Select this setting to cancel the initialization 
procedure.

ON

Only allows to accept the access from the PC 
whose MAC address is registered to this unit.

Allows to accept the access from any PC.