Справочник Пользователя для Yamaha X-V2600

Press n to select Start and then press 
ENTER.
Loud test tones are output from each speaker and 
“Measuring” appears during the AUTO SETUP 
procedure.

y
• To stop the AUTO SETUP procedure, press one of the 

cursor buttons (

k / n / l / h) or ENTER. In the pause 

mode, press k to retry the procedure, 

l to cancel AUTO 

SETUP.

• If an error message appears during testing, refer to 

TROUBLESHOOTING on page 126, and after carrying 
out the remedy, retry the AUTO SETUP procedure.

You can confirm the results of each analysis.

The results are displayed after all items have been 
analyzed.

• Press n and select Setup to set the measured values.
• Press k and select Retry to retry the AUTO SETUP 

procedure.

• Press h and select Detail to view information about 

measurement results and warning messages. For more 
details about warning messages, see 
TROUBLESHOOTING on page 126.

• Press l and select Exit to exit from the AUTO SETUP 

procedure. If you select Exit, “Don’t Setup?” appears on 
the screen. To set the measured values and exit, select Yes. 
To cancel the settings and exit, select No.

The results are displayed individually after each analysis.

• Press n and select Next to start measurement of the next 

menu item.

• Press k and select Retry to retry the AUTO SETUP 

procedure.

• Press h and select Detail to view information about 

measurement results and warning messages. For more 
details about warning messages, see 
TROUBLESHOOTING on page 126.

• Press l and select Exit to exit from the AUTO SETUP 

procedure. If you select Exit, “Don’t Setup?” appears on 
the screen. To set the measured values and exit, select Yes. 
To cancel the settings and exit, select No.