Справочник Пользователя для Yamaha X-V2600

Front (Front speakers)
Choices: Large, Small

• Select “Large” if you have large front speakers. The 

unit directs the entire range of the front left and right 
channel signals to the front left and right speakers.

• Select “Small” if you have small front speakers. The 

unit directs the low-frequency signals of the front 
channel to the speakers selected with Bass Out.

Center (Center speaker)
Choices: Large, Small, None

• Select “Large” if you have a large center speaker. The 

unit directs the entire range of the center channel signal 
to the center speaker.

• Select “Small” if you have a small center speaker. The 

unit directs the low-frequency signals of the center 
channel to the speakers selected with Bass Out.

• Select “None” if you do not have a center speaker. The 

unit directs all of the center channel signal to the front 
left and right speakers.

Surround (Surround left/right speakers)
Choices: Large, Small, None

• Select “Large” if you have large surround left and right 

speakers or if a rear subwoofer is connected to the 
surround speakers. The entire range of the surround 
channel signal is directed to the surround left and right 
speakers.

• Select “Small” if you have small surround left and right 

speakers. The low-frequency signals of the surround 
channel are directed to the speakers selected with Bass 
Out.

• Select “None” if you do not have surround speakers. 

This sets the unit to the Virtual CINEMA DSP mode 
(see page 44) and automatically sets the surround back 
speaker setting (Surround Back) to “None”.

Surround Back (Surround back left/right 
speakers)
Choices: Large x2, Small x2, Large x1, Small x1, None

• Select “Large x2” if you have two large surround back 

speakers. The unit directs the entire range of the 
surround back channel signal to the surround back 
speakers.

• Select “Small x2” if you have two small surround back 

speakers. The low-frequency signals of the surround 
back channels are directed to the speakers selected with 
Bass Out.

• Select “Large x1” if you have a large surround back 

speaker. The unit directs the entire range of the 
surround back channel signal to the surround back left 
speaker.

• Select “Small x1” if you have a small surround back 

speaker. The low-frequency signals of the surround 
back channel are directed to the speakers selected with 
Bass Out, and the rest of the frequency signals are 
directed to the surround back left speaker.

• Select “None” if you do not have a surround back 

speaker. The unit directs all of the surround back 
channel signal to the surround left and right speakers.

If you select “Large x1” or “Small x1”, connect a speaker to the 
SURROUND BACK (SINGLE) speaker terminals.