Справочник Пользователя для Yamaha htr-5890

Скачать
Страница из 104
AUTO SETUP
26
This receiver employs YAMAHA Parametric Room 
Acoustic Optimizer (YPAO) technology which lets you 
avoid troublesome listening-based speaker setup and 
achieves highly accurate sound adjustments. The supplied 
optimizer microphone collects and analyzes the sound 
your speakers produce in your actual listening 
environment.
y
The basic setup feature (page 31) is useful if you want to set up 
your system quickly and with minimal effort. However, we 
recommend that you come back and perform auto setup later to 
take advantage of YPAO and enjoy even higher fidelity.
• Please be advised that it is normal for loud test tones to be 
output during the auto setup procedure.
• If auto setup stops and error messages appear on the screen, 
follow the troubleshooting on page 29.
YPAO performs the following checks and makes 
appropriate adjustments to give you the best possible 
sound from your system.
WIRING
Checks which speakers are connected and the polarity of 
each speaker.
DISTANCE
Checks the distance of each speaker from the listening 
position and adjusts the timing of each channel.
SIZE
Checks the speaker’s frequency response and sets the 
appropriate low frequency crossover for each channel.
EQUALIZING
Adjusts frequency and levels of each channel’s parametric 
equalizer to reduce coloration across the channels and 
create a cohesive sound field. This is particularly 
important if you use different brands or sizes of speakers 
for some channels or have a room with unique sonic 
characteristics.
YPAO equalizing calibration incorporates three 
parameters (frequency, level and Q factor) for each of the 
seven bands in its parametric equalizer to provide highly 
precise automatic adjustment of frequency characteristics.
LEVEL
Checks and adjusts the sound level (volume) of each 
speaker.
1
Connect the supplied optimizer microphone 
to the OPTIMIZER MIC jack on the front 
panel.
• After you have completed the auto setup procedure, be 
sure to disconnect the optimizer microphone.
• The optimizer microphone is sensitive to heat.
–Keep it away from direct sunlight.
–Do not place it on top of this unit.
2
Place the optimizer microphone on a flat 
level surface with the omni-directional 
microphone head upward, at your normal 
listening position.
If possible, use a tripod (etc.) to affix the optimizer 
mic at the same height as your ears would be when 
you are seated in your listening position.
AUTO SETUP
Introduction
Notes
Optimizer microphone setup
Notes
PRESET/TUNING
EDIT
FM/AM
A/B/C/D/E
PRESET/TUNING
INPUT MODE
TONE CONTROL
MULTI CH
 INPUT
STRAIGHT
EFFECT
MEMORY
MAN'L/AUTO FM
TUNING MODE
AUTO/MAN'L MONO
PROGRAM
INPUT
OPTIMIZER
MIC
PHONES
SILENT CINEMA
SPEAKERS
A
B
Optimizer microphone position
01EN00_HTR5890U.book  Page 26  Thursday, December 23, 2004  12:39 PM