Справочник Пользователя для Yamaha HTR-6150

■ Editing sound fields parameters

You can enjoy good quality sound with the factory default 
parameters. Although you do not have to change the initial 
settings, you can change some of the parameters to better 
suit the input source or your listening room.

While listening to a source, press 5

AMP 

and then press S

PARAMETER.

Press 8k / n to select the desired parameter 
you want to change.

Press 8l / h to change the parameter 
value.

You cannot change parameter values when “MEMORY GUARD” 
in “OPTION MENU” is set to “ON” (see page 74).

y

Initial settings are indicated in bold under each parameter.

DSP LEVEL

Function:

Adjusts the effect level.

Choices:

MIN, MID, MAX

EFFECT LEVEL

Function:

Adjusts the effect level.

Choices:

LOW, HIGH

PANORAMA

Function:

Sends stereo signals to the surround 
speakers as well as the front speakers for 
a wraparound effect.

Choices:

OFF, ON

DIMENSION

Function:

Gradually adjusts the sound field either 
towards the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the 

front), initial setting is STD (standard).

CT WIDTH

Function:

Adjusts the center image from all three 
front speakers to varying degrees. A 
larger value adjusts the center image 
towards the front left and right speakers.

Control range: 0 (center channel sound is output only 

from center speaker) to 7 (center channel 
sound is output only from front left and 
right speakers), initial setting is 3.

C.IMAGE

Function:

Adjusts the front left and right channel 
output relative to the center channel 
more or less dominant as necessary.

Control range: 0.0 to 1.0, initial setting is 0.3.

01EN_HTR-6150_UC.book  Page 42  Friday, February 1, 2008  11:21 AM