Справочник Пользователя для Listen Technologies AO 6004
Danish Interpretation Systems
User Manual
Manual 01 18 04442
9
one of the 31 language channels or one of the three
Floor channels:
Floor channels:
Floor: automatic gain controlled output
Floor 1: loudspeaker unregulated audio
Floor 2: loudspeaker regulated audio
An ambience microphone will only be active on the
Floor channel, not on Floor 1 or Floor 2
Floor channel, not on Floor 1 or Floor 2
Values: {Floor 2, Floor 1, Floor, 1,…, 30, 31}
The volume of the outputs can also be set if the
default settings are not appropriate.
default settings are not appropriate.
Values: {Off, -40, -39,…, 14, 15}
Refer to the CAA and CUA User Manuals for more
details.
details.
Normal operation
Powering up
Connect the AO unit(s) to the rest of the system via
the DCS-LAN connectors and connect the audio
outputs to the appropriate units (tape recorders,
infrared transmitters, etc.).
the DCS-LAN connectors and connect the audio
outputs to the appropriate units (tape recorders,
infrared transmitters, etc.).
Switch on the power on the CU 6005/6010.
During the initialization the AO unit will
automatically assign channels to the outputs. The
unit is immediately ready to use after start-up unless
other channels need to be assigned to the outputs or
the channel volume needs to be adjusted. These
adjustments can only be done using the SW 6000.
automatically assign channels to the outputs. The
unit is immediately ready to use after start-up unless
other channels need to be assigned to the outputs or
the channel volume needs to be adjusted. These
adjustments can only be done using the SW 6000.