Справочник Пользователя для Heath Zenith 6022

4

POSSIBLE CAUSE
1.  Circuit breaker or fuse is turned off.
2.  Switch on device is turned off.
3.  Device is defective. Try remote using different device.
4.  Signals from transmitter are being blocked, or transmitter 

is out of range. Check for metal objects that could block 
the signal, or reposition the transmitter.

5.  Weak battery in the transmitter.
6.  Dip  switches  on  remote  and  outdoor  module  do  not 

match.

7.  Remote set to automatic (Dusk to Dawn) and surrounding 

light level is too bright.

1.  Same as 4 & 5 above.
2.  Remote set to automatic (Dusk to Dawn) and surrounding 

light level is too dark.

1.  Short term power line failure.
2.  Another transmitter on the same channel.

This device complies with Part 15 of the FCC Rules and RSS-210 of Industry 
Canada. Operation is subject to the following two conditions: (1) this device may 
not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
The user is cautioned that changes or modifications not expressly approved by 
the party responsible for regulatory compliance could void the user’s authority 
to operate the equipment.

SYMPTOM
Device  does 
not come on.

Device  does 
not turn off.

Device  comes 
on randomly.

WARNING: This product contains chemicals known to the State of California 
to cause cancer or birth defects, or other reproductive harm.

If you experience a problem, follow this guide. You may also want to visit our 
Web site at: www.hzsupport.com. If the problem persists, call* for assistance 
at 1-800-858-8501 (English speaking only), 7:30 AM to 4:30 PM CST (M-F). 
You may also write* to:
HeathCo LLC
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service
* If contacting Technical Service, please have the following information available: 
Model Number, Date of Purchase, and Place of Purchase.