Справочник Пользователя для Integra DTR-10.5

 

95

 

This item appears when the multichannel terminal 
board [E] is inserted.
The following are also settings for “Multichannel 1” or 
“Multichannel 2” (cannot be specified separately for 
each input source).
Some DVD decks output the LFE channel at 15 dB lower 
than the other channels in the multichannel output.
The level setting under the Level Calibration sub-menu 
is applied to the analog and digital inputs as well as the 
multichannel input. Therefore, in this setting, you can 
set the optimum LFE channel level applied only to the 
multichannel input.
You can select from 0 (Default), +5, +10 and +15 dB. 

 

The following are settings for digital audio output. 

 

 Select the device connected to “DIGITAL 

IN OPTICAL 1-6.” 

 

 Select the device connected to 

“DIGITAL IN COAXIAL 1-6.” 

 

 Select the device connected to the “Video 7 Input 

Digital” jack behind the front door of the DTR-10.5.

 

 Select the device connected to “DIGITAL 

IN (BALANCED) AES/EBU.” The “AES/EBU” is 
available when the board [E] equipped with AES/EBU 
terminal is inserted.

 

 Select this when no device is connected. 

 

For digital connections, you can set the digital signals to 
be detected preferentially. When “Digital Audio” is set 
to “No” on the Audio Assign Sub-menu above, this item 
is not displayed. 

 

: Automatically detects the format of input signals. 

The signal format (Dolby Digital, DTS, PCM, AAC, 
etc.) used for the selected source is automatically 
detected, and necessary decoding is performed. 

 

Select for DTS decoding. You should select this if 

you feel it takes too long to detect the signals when you 
have selected “Auto,” or if you dislike noises caused by 
CDs fast forwarding or rewinding. 
If any sound other than DTS is input, there is no sound. 

 

 Select for PCM decoding. You should select this 

if you dislike omission of the top of a subsequent tune 
when you have selected “Auto.” 
If any sound other than PCM is input, there is no sound. 

 

When playing any DTS-type CD or LD, always select 
“Auto” and “DTS.” Selecting “PCM” will cause noises. 

 

This item appears when the i.LINK (AUDIO) terminal 
board [A] is inserted.
When you connect multiple devices using the i.LINK 
(AUDIO) interface, the device names in the i.LINK 
connection appear and you can choose the input device 
from them using the cursor ([

]/[

]) buttons. The 

device selected here will be the preferred device among 
the connected i.LINK (AUDIO) devices.

 

 Select this when connected i.LINK (AUDIO) 

devices are not selected as input devices. 

This sub-menu appears when the ETHERNET terminal 
board [B] (for Net Audio) is inserted.

 

When input Music Server is selected from NET AUDIO, 
you can specify a server to be connected (See page 78). 

The following are settings for video. 

 

 Select the device connected to the “VIDEO IN 1-

6” jack.

 

Select the device connected to the “Video 7 Input 

L-Audio-R” jack behind the front door of the DTR-10.5.

 

Select this when you want video signal from the 

device you last selected to be output.

 

 Select this when no device is connected. 

 

Select the device connected to the “S VIDEO IN 1-

6” jack.

 

Select the device connected to the “Video 7 Input 

L-Audio-R” jack behind the front door of the DTR-10.5.

 

Select this when you want video signal from the 

device you last selected to be output.

 

Select this when no device is connected. 

 

 Select the device connected to the 

“COMPONENT VIDEO IN 1-4” jack. The item 
“RCA 4” is available when an option board that has 
RCA-type component VIDEO terminals [J] is installed 
on the USA and Canadian models.

 

 (Only available with an option board [J] that has 

BNC-type component terminals)

 

 Select the device 

connected to the “COMPONENT VIDEO IN” BNC 
type jack.

 

Select this when you want video signal from the 

device you last selected to be output.

 

 Select this when no device is connected. 

 

This item appears when the HDMI terminal board [L] is 
inserted.

 

 Select the device connected to the “HDMI IN 1” 

jack. When selecting this, the video signal from the 
HDMI IN 1 terminal will also be output to the HDMI 
OUT terminal.

 

Select the device connected to the “HDMI IN 2” 

jack. When selecting this, the video signal from the 
HDMI IN 2 terminal will also be output to the HDMI 
OUT terminal.

 

Select this when you want the video signal 

such as Composite Video, S Video, and Component 
Video to be output from the HDMI OUT terminal.

 

Select this when you want video signal from the 

device you last selected to be output.

 

 Select this when no device is connected.