Справочник Пользователя для Integra DHC-9.9
138
Remote Control Codes for Integra/Onkyo
Components Connected via
Components Connected via
u
Integra/Onkyo components that are connected via
u
are controlled by pointing the remote controller at the
AV controller, not the component. This allows you to
control components that are out of view, in a rack, for
example.
AV controller, not the component. This allows you to
control components that are out of view, in a rack, for
example.
If you want to control an Integra/Onkyo component by
pointing the remote controller directly at it, or you want
to control an Integra/Onkyo component that’s not con-
nected via
pointing the remote controller directly at it, or you want
to control an Integra/Onkyo component that’s not con-
nected via
u, use the following remote control codes:
• [DVD] Remote Mode button
5001: Integra/Onkyo DVD player without
u
(default)
• [CD] Remote Mode button
6001: Integra/Onkyo CD player without
u (default)
• [MD] Remote Mode button
6007: Onkyo MD recorder without
u
• [CDR] Remote Mode button
6005: Onkyo CD recorder without
u
• [Dock] Remote Mode button
6003: Onkyo RI Dock without
u
Note:
If you connect an
If you connect an
u-capable Onkyo MiniDisc
recorder, CD recorder, or RI Dock to the TAPE IN/OUT
jacks, or connect an RI Dock to the AUX 1 jacks, for
jacks, or connect an RI Dock to the AUX 1 jacks, for
u
to work properly, you must set the Input Display accord-
ingly (see page 57).
ingly (see page 57).
Resetting the Remote Mode Buttons
You can reset a Remote Mode button to its default
remote control code.
remote control code.
You can reset the remote controller to its default settings.
1
Make sure the Integra/Onkyo component
is connected with an
is connected with an
u cable and an ana-
log audio cable (RCA).
See page 44 for details.
See page 44 for details.
2
Enter the appropriate remote control code
to the Remote Mode button.
to the Remote Mode button.
• [DVD] Remote Mode button
5002: Integra/Onkyo DVD player with
u
• [CD] Remote Mode button
6002: Integra/Onkyo CD player with
u
• [MD] Remote Mode button
6008: Onkyo MD recorder with
u
• [CDR] Remote Mode button
6006: Onkyo CD recorder with
u
• [Dock] Remote Mode button
6004: Onkyo RI Dock with
u
See the previous page for how to enter remote
control codes.
control codes.
3
Press the Remote Mode button, point the
remote controller at the AV controller, and
operate the component.
remote controller at the AV controller, and
operate the component.
1
While holding down the Remote
Mode button that you want to
reset, press the TV [
Mode button that you want to
reset, press the TV [
9] button.
The Remote indicator flashes three
times.
times.
2
Press the Remote Mode button
again.
The Remote indicator flashes twice,
indicating that the button has been
reset.
The [DVD] and [CD] Remote Mode
buttons are preprogrammed with
remote control codes for controlling
Onkyo DVD players and CD players,
respectively. When these buttons are
reset, the preprogrammed codes are
restored.
again.
The Remote indicator flashes twice,
indicating that the button has been
reset.
The [DVD] and [CD] Remote Mode
buttons are preprogrammed with
remote control codes for controlling
Onkyo DVD players and CD players,
respectively. When these buttons are
reset, the preprogrammed codes are
restored.
Resetting the Remote Controller
1
While holding down the
[Receiver] Remote Mode button,
press the [Standby] button.
The Remote indicator flashes five
times.
[Receiver] Remote Mode button,
press the [Standby] button.
The Remote indicator flashes five
times.
2
Press the [Receiver] Remote
Mode button again.
The Remote indicator flashes twice,
indicating that the remote controller
has been reset.
Mode button again.
The Remote indicator flashes twice,
indicating that the remote controller
has been reset.