Справочник Пользователя для ONKYO tx-sr444
Advanced Settings (Setup Menu)
En-20
Setting Item
Default Value
Setting Details
Surround Right
0dB
Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
Back Right
0dB
Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
● The setting cannot be changed during ZONE
B playback.
Back Left
0dB
Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
● The setting cannot be changed during ZONE
B playback.
Surround Left
0dB
Select a value between "-12dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
Subwoofer
0dB
Select a value between "-15dB" and "+12dB".
A test tone will be output each time you change
the value. Select the desired level.
● The speaker "Level Calibration" may be unable to be changed depending on the settings in
"Configuration" - "Speaker Channels" / "Subwoofer".
● In the following cases, the settings for "Level Calibration" cannot be changed:
– While MUTING is on
– While audio is not being output from ZONE A
3� Audio Adjust
Configure various settings related to sound, such as settings for listening to multiplex audio
or multilingual TV broadcasts and sound field settings for listening modes.
Multiplex/Mono
Setting Item
Default Value
Setting Details
Multiplex
Input Channel
Main
Set the audio channel or language to be output
when playing multiplex audio or multilingual TV
broadcasts etc.
"Main": Main channel only
"Sub": Sub channel only
"Main / Sub": Main and sub channels will be
output at the same time.
● If multiplex audio is being played, "1+1" will
be displayed when DISPLAY is pressed.
Mono
Input Channel
Left + Right
Set the input channel to use for playing any
2 ch digital source such as Dolby Digital, or 2-ch
analog/PCM source in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left + Right" : Left and right channels
Dolby
Make the settings for Dolby listening mode.
Setting Item
Default Value
Setting Details
Loudness
Management
On
Enable the Late Night function that allows
you to enjoy surround sound of Dolby TrueHD
playback even in low volume.
"On": Use this function
"Off": Do not use this function