Справочник Пользователя для ONKYO tx-nr545

Step 2: Initial Setup

En-14

When the access point is not displayed

Select "Other..." with the

cursor on the remote

controller and press ENTER to display the keyboard

screen. Input the SSID and password. Make the

following settings according to the router setting.



WPA/WPA2 method

Select "WPA" or "WPA2" in "Security Method",

select "OK" and press ENTER.



WEP method

Select "WEP" in "Security Method" and select

"Default Key ID". Then select "OK" and press

ENTER.

● If encryption setting has not been made on the

wireless LAN router, select "None" in "Security

Method", select "OK" and press ENTER.



If you selected "Use iOS Device (iOS7 or

later)"

2� On the iOS device, go to "Settings"-"Wi-Fi" and turn

on the setting, then select this unit in "SETUP NEW

AIRPLAY SPEAKER"�

3� Tap "Next"�



When connection is successful

"Successfully Connected" is displayed on the screen.

MAC Address xxxxxxxxxxx
IP Address, Subnet Mask, Gateway, DNS Server
Gateway Ping
Internet Service Test
Successfully connected.

Network Connection

Exit

SETUP

If the screen is not displayed, try doing the setting again.

If "Push Button" connection with the wireless LAN router

does not work, try "Enter Password".

● A confirmation screen asking you to agree to the

"Yes" and press ENTER to indicate agreement.

To improve our products and services of Onkyo Corporation,
Onkyo may collect information about your receiver usage.
To know more about what type of information we collect and
how we use it please review Onkyo’s Privacy Policy at
http://www.onkyo.com/privacy/

I have read Onkyo’s Privacy Policy and agree to its terms.

Yes
No

ONKYO PRIVACY STATEMENT



Terminating initial setup

After finishing the initial setup, keep "Finished" selected

and press ENTER on the remote controller. Connection and

setting of the unit is now complete.

Audio output of connected players

To enjoy digital surround sound including Dolby Digital and

DTS, audio output should be set to "Bitstream output" on the

connected Blu-ray Disc Player or other device.

Depending on the settings on the Blu-ray Disc Player, there

may be cases when Dolby TrueHD, Dolby Atmos, and DTS-

HD Master Audio is not output according to the format of the

source.

In this case, in the Blu-ray Disc Player settings try setting "BD

video supplementary sound" (or secondary sound) to "Off".

Change the listening mode after changing the setting to

confirm.