Справочник Пользователя для ONKYO TX-NR5010
Turning On & Basic Operations
En-29
Playback
■
Operating with the remote controller
■
Operating on the AV receiver
The on-screen information appears only on a TV that
is connected to HDMI outputs. If your TV is
connected to other video outputs, use the AV
receiver’s display when changing settings.
is connected to HDMI outputs. If your TV is
connected to other video outputs, use the AV
receiver’s display when changing settings.
This section describes the procedure for using the
remote controller, unless otherwise specified.
remote controller, unless otherwise specified.
Playing the Connected Component
1
Press
RECEIVER followed by an INPUT
SELECTOR button.
RECEIVER
VOL
q/w
INPUT SELECTOR
Listening mode buttons
2
)
)
)
)
(
)
(
)
(
(
3
To adjust the volume, use
VOL
q/w.
4
)
1
Use the input selector buttons to select the input
source.
source.
2
Start playback on the source component.
3
To adjust the volume, use the
MASTER VOLUME
control.
4
Select a listening mode and enjoy!
■
Screen Saver
If there is no video signal on the current input source and
no operation for a specific time (three minutes by
default), a screen saver automatically comes on.
no operation for a specific time (three minutes by
default), a screen saver automatically comes on.
Tip
• The time until the screen saver activates itself can be changed
in the “Screen Saver” setting (
).
• The screen will return to its previous state if the AV receiver is
operated.
MASTER VOLUME
LISTENING MODE
Input selector buttons