Справочник Пользователя для ONKYO TX-NR5010

■

`

Off:

The format is detected automatically. If no digital 
input signal is present, the corresponding analog 
input is used instead.

`

PCM:

Only 2-channel PCM format input signals will be 
heard. If the input signal is not PCM, the PCM 
indicator will flash and noise may also be produced.

`

DTS:

Only DTS (but not DTS-HD) format input signals 
will be heard. If the input signal is not DTS, the dts 
indicator will flash and there will be no sound.

When “HDMI”, “COAXIAL” or “OPTICAL” is selected 
in the “Audio Selector” setting, you can then specify the 
signal type in “Fixed Mode”.
Normally, the AV receiver detects the signal format 
automatically. However, if you experience either of the 
following issues when playing PCM or DTS material, you 
can manually set the signal format to PCM or DTS.
• If the beginnings of tracks from a PCM source are cut off, 

try setting the format to PCM.

• If noise is produced when fast forwarding or reversing a 

DTS CD, try setting the format to DTS.

• The setting will be reset to “Off” when you change the setting in 

“Audio Selector”.

You can assign a default listening mode to each input 
source that will be selected automatically when you select 
each input source. For example, you can set the default 
listening mode to be used with Dolby Digital input signals. 
You can select other listening modes during playback, but 
the mode specified here will be resumed once the AV 
receiver has been set to standby.

■

Analog/PCM/Digital
With this setting, you can specify the listening mode 
used when an analog (CD, TV, LD, VHS, MD, turntable, 
radio, cassette, cable, satellite, etc.) or PCM digital (CD, 
DVD, etc.) audio signal is played.

• For  the  “GAME2” input selector, only “PCM” is available.

■

Mono/Multiplex Source
With this setting, you can specify the listening mode 
used when a mono digital audio signal is played (DVD, 
etc.).

■

2ch Source
With this setting, you can specify the listening mode 
used when 2-channel (2/0) stereo digital sources, such as 
Dolby Digital or DTS, are played.

q/w to select the input source that you want to 

The following menu appears.

“Setup”

e r

q/w to select the signal format that you want to 

e/r to select a listening mode.

Only listening modes that can be used with each input 
signal format can be selected (

 to 

).

The “Last Valid” option means that the listening 
mode selected last will be used.
The “Straight Decode” option means that straight 
decoding listening mode (Dolby Digital, DTS, etc.) is 
selected.

• For  the  “TUNER” input selector, only “Analog” will be 

available.

• For  the  “NET” or “USB” input selector, only “Digital” will 

be available.