Справочник Пользователя для ONKYO HT-RC370
12
En
Connections
Connecting the AV Receiver
Connecting the Speaker Cables
The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one
surround back speaker, connect it to the SURR BACK L terminals.
surround back speaker, connect it to the SURR BACK L terminals.
■
Screw-type speaker terminals
Strip 1/2" to 5/8" (12 to 15 mm) of insulation from
the ends of the speaker cables, and twist the bare
wires tightly, as shown.
the ends of the speaker cables, and twist the bare
wires tightly, as shown.
■
Banana Plugs (North American models)
• If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.
• Do not insert the speaker code directly into the center hole of the speaker terminal.
• Do not insert the speaker code directly into the center hole of the speaker terminal.
Connecting Your Speakers
Surround
back left
Surround
left
Surround
right
Front high
left
Front high
right
Front left
Front right
Center
Front wide
right
Front wide
left
Surround
back right
1/2" to 5/8" (12 to 15 mm)