Справочник Пользователя для ONKYO TXNR525

■

Coaxial digital connections allow you to enjoy digital 
sound such as PCM

, Dolby Digital or DTS. The 

audio quality is the same as optical.

■

Analog audio connections (RCA) carry analog audio.

*1

For PCM signals, the supported sampling rates are 
32/44.1/48/88.2/96 kHz. With HDMI connections, 176.4 
and 192 kHz are also supported.

• The AV receiver does not support SCART plugs.
• The AV receiver’s optical digital jacks have shutter-type 

covers that open when an optical plug is inserted and close 
when it’s removed. Push plugs in all the way.

• To prevent shutter damage, hold the optical plug 

straight when inserting and removing.

 Orange

 White

 Red

This section explains how to connect the supplied indoor FM antenna and AM loop antenna.
The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the 
antenna to use the tuner.

• Once your AV receiver is ready for use, you’ll need to tune into a radio station and position the antenna to achieve the best 

possible reception.

• Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.

• If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna 

instead.

• If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available 

outdoor AM antenna.

Thumbtacks, etc.

Insert the plug fully 
into the jack.

Insert the plug fully 
into the jack.

Push.

Insert wire.

Release.

Indoor FM antenna (supplied)

AM loop antenna (supplied)

• Be careful not to injure 

yourself when using 
thumbtacks.