Справочник Пользователя для ONKYO TXNR525

■

`

0 to 2 to 5

With this setting, you can specify by how much the 
front left and right channel output is attenuated in 
order to create the center channel. 
Changing the value from “0” to “5” will spread the 
sound of the center channel to left and right 
(outwards).

■

`

Wide:

Select if the listening angle is greater than 30 
degrees.

`

Narrow:

Select if the listening angle is less than 30 
degrees.

With this setting, you can optimize the Theater-
Dimensional listening mode by specifying the angle of 
the front left and right speakers relative to the 
listening position. Ideally, the front left and right 
speakers should be equidistant from the listening 
position and at an angle close to one of the two 
available settings.

• For best results, we recommend setting “

” to 20° 

and “Wide” to 40°.

Items can be set individually for each input selector.
Press the input selector buttons to select an input 
source.

The tone for each speaker is set automatically by 
Audyssey MultEQ

®

 Room Correction and Speaker 

Setup. To enable the following settings, you must first 
perform the Room Correction and Speaker Setup 
(

).

• These technologies cannot be used when a pair of 

headphones is connected.

■

`

Off 

`

Movie:

Select this setting for movie material.
The Audyssey indicator will light.

`

Music:

Select this setting for music material.
The Audyssey indicator will light.

• When “Audyssey Quick Start” has been used for 

measurement, “Audyssey” cannot be selected.

• Audyssey equalizing does not work with DSD sources.

■

`

Off 

`

On:

Audyssey Dynamic EQ

®

 becomes active.

The Dynamic EQ indicator will light.

With Audyssey Dynamic EQ, you can enjoy great 
sound even when listening at low volume levels.
Audyssey Dynamic EQ solves the problem of 
deteriorating sound quality as volume is decreased by 
taking into account human perception and room 
acoustics. It does so by selecting the correct 
frequency response and surround volume levels 
moment-by-moment so that the content sounds the 
way it was created at any volume level — not just at 
reference level.

■

`

0 dB: 

This should be selected for movie contents.

`

5 dB :

Select this setting for content that has a very 
wide dynamic range, such as classical music.

`

10 dB:

Select this setting for jazz or other music that 
has a wider dynamic range. This setting should 
also be selected for TV content as that is usually 
mixed at 10 dB below film reference.

`

15 dB:

Select this setting for pop/rock music or other 
program material that is mixed at very high 
listening levels and has a compressed dynamic 
range.

Movies are mixed in rooms calibrated for film 
reference. To achieve the same reference level in a 
home theater system each speaker level must be 
adjusted so that –30 dBFS band-limited (500 Hz to 
2000 Hz) pink noise produces 75 dB sound pressure 
level at the listening position. A home theater system 
automatically calibrated by Audyssey MultEQ will play 

Front left speaker

Front right speaker

Listening angle: 30°