Справочник Пользователя для ONKYO TXNR525

You can use the AV receiver’s remote controller to 
control your other AV components, including those 
made by other manufacturers. This section explains 
how to enter the remote control code for a component 
that you want to control: DVD, TV, CD, etc.

The following REMOTE MODE buttons are 
preprogrammed with remote control codes for 
controlling the components listed. You do not need to 
enter a remote control code to control these 
components.
For details on controlling these components, see the 
indicated pages.

You’ll need to enter a code for each component that 
you want to control.

• Though the provided remote control codes are correct at 

the time of release, they are subject to change.

You can change the configuration of colored buttons, 
with which REMOTE MODE buttons are preset.

• To reset the REMOTE MODE buttons to their default 

).

• If any other button than the colored buttons is pressed, the 

operation will be cancelled.

• This operation cannot be done while the AV receiver is in 

Receiver mode or when Zone 2 is active.

BD/DVD Onkyo Blu-ray Disc player (

Onkyo CD player (

)

Apple TV

Look up the appropriate remote control code 
in the separate Remote Control Codes list.
The codes are organized by category (e.g., DVD 
player, TV, etc.).

While holding down the REMOTE MODE 
button to which you want to assign a code, 
press and hold down DISPLAY (about 3 
seconds).
The remote indicator lights.

• Remote control codes cannot be entered for 

RECEIVER and the multi zone button.

• Only TV remote control codes can be entered for TV.
• Except for RECEIVER, TV, and the multi zone button, 

remote control codes from any category can be 
assigned for the REMOTE MODE buttons. However, 
these buttons also work as input selector buttons, so 
choose a REMOTE MODE button that corresponds 
with the input to which you connect your component. 
For example, if you connect your CD player to the CD 
input, choose TV/CD when entering its remote control 
code.

Within 30 seconds, use the number buttons to 
enter the 5-digit remote control code.
The remote indicator flashes twice.
If the remote control code is not entered 
successfully, the remote indicator will flash once 
slowly.

While holding down the REMOTE MODE 
button that you want to program, press and 
hold down A (Red) until the remote indicator 
lights (about 3 seconds).
You can only change colored buttons for 
components whose codes belong to categories 
of the Remote Control Codes list (BD/DVD 
player, TV, cable set-top box, etc).

Within 30 seconds, press the colored buttons 
in the order that you want to reassign them.
The button presses are assigned to each button 
from left to right. The remote indicator flashes 
twice, indicating that the sequence has been 
successfully assigned. If the sequence is not 
successfully assigned, the remote indicator will 
flash once slowly.