Справочник Пользователя для Marantz SR4001

The Multi Room system is a function which allows 
you to listen to the same or a different source in a 
room other than the room in which the SR5001 is 
located. 
To use this function, a multi room remote unit and 
remote control signal receiver available from your 
Marantz dealer are necessary. 
The operations possible with the multi room function 
are explained briefl y below. 
For details, refer to the instruction manual supplied 
with the multi room remote control unit and receiver.

When the outputs of the MULTI OUT terminals are 
wired and connected to amplifi ers installed in other 
rooms or M (MULTI) SPEAKER B terminals are 
wired and connected to L&R speakers in other room, 
different sources can be played in rooms other than 
the main room in which this unit and the playback 
devices are installed. 

SR5001 has some feature to MULTI ROOM SYSTEM 
as source selector, sleep timer, Multi Room Speaker 
output and remote control.

The SR5001 is equipped with audio pre-out terminals 
for which the volume is adjustable as the MULTI 
output terminals.
A separately sold stereo power amplifier can be 
connected to enjoy multi room playback.
The MULTI OUT system can not be operated with the 
supplied remote controller.

 Press 

the 

 button. The unit enters multi 

room mode and the display indicates “

” and fl ashes  the  “

” indicator 

for approx. 10 seconds. 

  In this time, you can select the input source by 

turning the input selector knob.

 

  Then, the display indicates “

” 

“

” for approx. 5 seconds. 

  During this time, you can set the volume level 

in the multi room as desired.

 

  This will only set the volume in the second 

room.

The SR5001 allows you to connect another set 
of speakers and place them in a different room or 
separated area for listening to music.
The MULTI ROOM SPEAKER system can not be 
operated with the supplied remote controller.

 Press 

the 

 button. The 

unit enters multi room speaker mode and 
the display indicates “

” and 

fl ashes  the  “

” indicators for approx. 10 

seconds. 

  In this time, you can select the input source by 

turning the input selector knob.

  Then, the display indicates “

” 

“

” for approx. 5 seconds. 

 

  During this time, you can set the volume level 

in the multi room as desired.

 

  This will only set the volume in the multi room.

• MULTI ROOM SPEAKER On/ Off is available in 

main room only. 

• MULTI ROOM SPEAKER output terminals can 

be used when the SURROUND BACK SPEAKER 
is set NONE in SPEAKER SETUP menu. (See 
SPEAKER SETUP, page 26)

• “The Surr. Back Speakers are in use” is displayed 

by pressing the MULTI SPEAKER button when 
the SURROUND BACK SPEAKER is set except 
NONE in SPEAKER SETUP menu. (See SPEAKER 
SETUP, page 26)

•  Multi room operations cannot be performed from the 

remote controller.