Справочник Пользователя для Marantz SR4500

To program the SR4500 for automatic standby,
press the 

button

on the remote.

Each press of the button will increase the time
before shut down in the following sequence.

The sleep time will be shown for a few seconds in
the display on the front panel, and it will count
down until the time has elapsed.
When the programmed sleep time has elapsed,
the unit will automatically turn off.
Note that the SLEEP

indicator on the display will

illuminate when the Sleep function is programmed.
To cancel the Sleep function, press the 

button until the display shows “SLEEP OFF” and the
SLEEP indicator will disappear.

Press the 

 button on the remote to turn on the

NIGHT mode.
Selecting the Night Mode ON is effective in Dolby
Digital only, and it compresses the dynamic range.
This softens loud passages such as sudden
explosions, to help prevent disturbing others late at
night.
To turn off the Night mode, press the 

 button

again.

Before you can listen to any input media, you must
first select the input source on the SR4500.

To select DVD, turn the 

knob on the front panel or simply

press the 

button on the remote.

After you have selected DVD, simply turn on the
DVD player and play the DVD.

• The input name will appear in the display on the

front panel.

• As the input is changed, the SR4500 will

automatically switch to the digital input, surround
mode, attenuation, and night mode status which
were entered during the configuration process
for that source.

• When an audio source is selected, the last video

input used remains routed to the 

Outputs

and 

Outputs. This

permits simultaneous viewing and listening to
different sources.

• When a Video source is selected, the video

signal for that input will be routed to the 

 jacks and will be viewable on a TV

monitor connected to the SR4500.
If a component video input is connected to the

or 

component inputs, it will be routed

to the

. Make certain

that your TV is set to the proper input to view the
signal.

To select the surround mode during playback, press
the 

button on the front panel or

the 

 buttons on the remote.

Adjust the volume to a comfortable level using the

control knob

on the front panel

or 

buttons on the remote.

To increase the volume, turn the 

knob

clockwise or press 

button on the remote, to

decrease the volume, turn counterclockwise or press

button on the remote.

• The volume can be adjusted within the range of – 

∞

to 18 dB, in steps of 1 dB.

• However, when the channel level is set as described

on page 20, if the volume for any channel is set at
+1 dB or greater, the volume cannot be adjusted up
to 18 dB.

(In this case the maximum volume adjustment
range is “18 dB - Maximum value of channel level)

During a listening session you may wish to adjust
the Bass and Treble Control

 to suit your listening

tastes or room acoustics.

To adjust the bass effect, press 

 or 

on the remote.
To adjust the treble effect, press 

 or

 on the remote.

• The tone control function can work in the AUTO

Surround, Stereo, Dolby PLIIx, DTS, DTS-ES,
and  Multi Ch. Stereo mode.

To temporarily silence all speaker outputs such as
when interrupted by a phone call, press the 

button on the front panel or 

 button on the

remote.
This will interrupt the output to all speakers and the
head-phone jack, but it will not affect any recording
or dubbing that may be in progress.
When the system is muted, the display will show
“

.

Press the 

button again to return to normal

operation.

AAC

AAC

3

2

1

6

5

4

9

8

0

7

ENTER

ENTER

3

2

1

6

5

4

9

8

0

7

ENTER

ENTER

3

2

1

6

5

4

9

8

0

7

ENTER

OFF

10

20

30

40

90

80

70

60

50

SR4500N DFU_01_ENG 2_2

04.5.14, 4:23 PM

Page 23

Adobe PageMaker 6.5J/PPC