Справочник Пользователя для Marantz SR4021

 

  Tune into the desired radio station. (See the 

“MANUAL TUNING” or “AUTO TUNING”).

 Press the MEMORY button on the front panel. 

 

  “MEMORY” indicator blinks in the display.

 

 Select 

the 

preset number by turning the MULTI 

JOG  knob while it is  still blinking. (approx. 5 
second)

 

 Press the MEMORY  button  again to enter. 

“MEMORY” indicator  stops blinking  and  goes 
out. 

  The 

station  is  now  stored in the specified 

preset memory location.

 

  Tune into the desired radio station. (See the 

“MANUAL TUNING” or “AUTO TUNING”).

 

 Press the MEMO / PROG button on the remote 

control unit. “MEMORY” indicator blinks in the 
display.

 

  Enter the desired preset  number by pressing 

the numeric keypads.

•  When entering a single digit number (2 for example), 

either input “02” or just input “2” and wait for a few 
seconds.

• If a preset number already used is selected ,the 

currently tuned station is stored with the preset 
number and the formerly stored station with the 
number is erased without any warning.

You can preset  up to 30 AM/FM stations  in  any 
order. 
For each station, you can memorize the frequency 
and reception mode if desired.

This  function  automatically  scans the AM and FM 
band and enters all stations with proper signal 
strength into the memory.

 

  Select the FM band with the BAND button on 

the front panel.

 

  Tune in the lowest receivable frequency.

 

 Press  and hold down the MEMORY  button 

and  AUTO TUNE  button  simutaneously, auto 
presetting will start.

 

  Each time the tuner fi nds a station, the scanning 

will pause and memory.

 

 Operation  stops  automatically when all 30 

preset memory positions are fi lled or when auto 
scanning attains the highest end of all bands. 
To  stop the auto preset function at anytime, 
press the CLEAR button.

If Auto Presetting is interrupted by pressing the 
CLEAR button, the memory which has already been 
set is kept still.

 

 Press the P.SCAN on the remote control unit. 

  The 

preset  station with the lowest preset 

number is recalled fi rst. 

 

 Preset stations are recalled in sequence (No. 1 

→ No. 2 → etc.) for 5 seconds each. 

      No stored preset number will be skipped.

 

 You can fast forward through the preset 

stations by pressing the CHANNEL / SKIP 
T continuously. 

  When the desired preset  station  is received, 

cancel the preset  scan operation by pressing 
the CLEAR or P.SCAN.

 

 Press the F/P button to show the preset station 

on the display. Select the desired preset station 
by turning the MULTI JOG  knob on the front 
panel. 

 

 Press the CHANNEL/SKIP 

S or T button 

to  select the desired preset  station, or input 
the desired preset channel with the numeric 
keypad on the remote control unit.