Справочник Пользователя для Marantz SR6400

After all components are connected, initial setup
must be performed.

The SR6400 incorporates an on-screen menu
system, which makes various operations possible by
using the cursor ( ,  ,   ,  ) and 

buttons on the

remote control or

 dial, 

  /   button and 

button on the front panel.

Use the 

 dial the same as the Up/

Down button on the remote, 

    /   button

the same as the Left/Right button on the remote, the

button the same as the 

button on the

remote.

• To view the on-screen displays, make certain you

have made a connection from the Monitor Out jack
(VIDEO or S-VIDEO ) on the rear panel to the
composite, S-Video input of your TV or projector.
(see 12 page)

Select

the 

mode on the remote control.

Press the 

 button on the remote control

to display the “SETUP MAIN MENU” of the
OSD menu system. There are 7 items in the
SETUP MAIN MENU.
If you enter this menu from the MULTI dial on
the front panel.
Press 

to show the “SETUP MENU”

in the FL display and press the 

button.

Select a desired sub-menu with the   or   cursor
buttons, and press the 

button to enter.

The display will change to the selected sub-menu.
You can lock the condition of setup to each
sub-menu with the   or   cursor buttons.

 If you desire to adjust any sub-menu,

you need to set it to UNLOCKED.

If you desire to exit from this menu system,
press the 

 button (or 

button on

the front panel), or move the cursor to 

and press the 

button.

  ∗∗∗

  ∗∗∗

  ∗∗∗

  ∗∗∗

  ∗∗∗