Справочник Пользователя для Sennheiser I EM 3732-II Command

21

Using the receiver

왘

Position the transmitter’s infra-red interface at a max. distance of 5 cm
in front of the infra-red interface (sync)

.

The transfer starts automatically. During the transfer, the two blue
LEDs in the infra-red interface (sync)

 flash and the backlighting of

the 

sync

button

 flashes green.

– After successful completion of the synchronization, the two blue

LEDs in the infra-red interface (sync)

 stop flashing and the

sync

button 

 is backlit in 

green

. The receiver’s frequency and name

are now also set on the transmitter and the transmission link is ready
for operation.

– If an error occurred during synchronization (e.g. the transmitter is

too far away from the receiver), the two blue LEDs in the infra-red
interface (sync)

 stop flashing and the 

sync

button

 is backlit in

red

.

Identifying receivers using the “Wireless Systems 
Manager” software (identifying function)

In multi-channel operation, it can be useful to identify the individual chan-
nels of the receivers via the “Wireless Systems Manager” software. The
identifying function shows you which channel is assigned to which
receiver.

왘

Start the identifying function as described in the instruction manual of
the “Wireless Systems Manger” software.
“

Identified

” appears on the status display of the identified receiver:

After 60 seconds, the text disappears and the current status display is
shown again.

To change to the current status display before the end of the 60 seconds:

왘

Press the 

esc

button

.

5cm

<

µV

 

The infra-red interface of the SKM 5200-II hand-held transmitter is
located at the left-hand margin of the display. Position the trans-
mitter’s infra-red interface precisely in front of the receiver’s infra-
red interface (sync)

.

Identified

M

H

z

6.000

.01

BANK
CH

6

COM

AF