Справочник Пользователя для Sennheiser I EM 3732-II Command
The product family
6
The frequency bank system
The receivers are available in four UHF frequency ranges with up to
184 MHz switching bandwidth:
184 MHz switching bandwidth:
The receivers have seven frequency banks:
400
600
800
1000
470 – 638
Range L
776 – 960
Range P
614 – 798
Range N
606 – 790
Range N-GB
Channel Frequency bank
1
2
3
4
5
6
U
1
The receiving frequencies are factory-
preset (see enclosed frequency table)
and cannot be changed.
preset (see enclosed frequency table)
and cannot be changed.
The receiving
frequencies can
be freely selected
within the switch-
ing bandwidth.
frequencies can
be freely selected
within the switch-
ing bandwidth.
2
...
max. 60
CAUTION!
Risk of reception interference!
If – within the receiver’s frequency range – transmitters
transmit on channels from different frequency banks, recep-
tion can be subject to interference and intermodulation. Only
the factory-preset frequencies within the frequency banks
“
transmit on channels from different frequency banks, recep-
tion can be subject to interference and intermodulation. Only
the factory-preset frequencies within the frequency banks
“
1
” to “
6
” are interference and intermodulation free.
왘
Set all transmitters of a multi-channel system to different
channels within the same frequency bank.
channels within the same frequency bank.
Optimized for maximum
transmission reliability
transmission reliability
Additionally available channels in
Low Intermodulation mode
Low Intermodulation mode