Справочник Пользователя для RCA Stereo Receiver with Remote Control

12

If the receiver is not working as it should, the following suggestions might help. If you follow the suggestions in this chart and the receiver still 
does not work properly, contact your local RadioShack store for assistance.

Problem

Cause

Suggestion

Power does not turn on.

Power cord is disconnected.

Plug in the power cord.

No sound.

Incorrect connections.

Check and correct the connections.

The mute function is activated.

Press 

.

The volume is turned down.

Turn up the volume.

Speaker wires are disconnected.

Connect the speaker wires.

Neither set of speakers is selected.

Press 

 

 or 

.

Both 

 

 and 

 are selected when only one set 

of speakers is connected.

Press 

 

 or 

 to turn off the speakers 

that are not connected.

 

 is selected.

Press 

 

 so 

 

 turns off.

Sound from only one speaker.

One of the speaker wires or the input cord is 
disconnected.

Check all connections.

 is set too far to one side.

Set 

 to the center position.

High noise level.

Station not correctly tuned.

Adjust tuning.

Antenna not connected.

Connect antenna.

FM antenna still coiled or is not pointing in the correct 
direction.

Stretch both ends of the antenna taut and reposition 
the antenna.

AM loop antenna not pointing in the correct direction.

Adjust the AM loop antenna.

Noise is coming from another electrical appliance.

Try using an AC line noise filter to reduce the noise.

Automatic tuning does not stop when 
searching for stations.

Stations are too weak.

Use a better antenna.

Remote control does not work.

Batteries are weak or missing.

Install fresh batteries.

Poor angle or too great a distance from the remote sensor 
window.

Use the remote within the effective range.

There is an obstacle between you and the remote sensor 
window.

Change your position or remove the obstacle.

A fluorescent light is shining on the remote sensor 
window.

Turn off the light.