Справочник Пользователя для RCA RV-9968
9
WIDE
The WIDE mode can be activated in both the Pro
Logic and the 3 Stereo modes. This mode utilizes
just the three front speakers - left main, right main
and center - with all audio delivered through the
center speaker. The center speaker
will reproduce the same bass levels as the left and
right main speakers.
The WIDE mode can be activated in both the Pro
Logic and the 3 Stereo modes. This mode utilizes
just the three front speakers - left main, right main
and center - with all audio delivered through the
center speaker. The center speaker
will reproduce the same bass levels as the left and
right main speakers.
SURROUND MODE
Included in the SURROUND MODE category are Dolby
Pro Logic, Dolby 3 Stereo, Hall and Bypass.
Included in the SURROUND MODE category are Dolby
Pro Logic, Dolby 3 Stereo, Hall and Bypass.
DOLBY PRO LOGIC
The Pro Logic mode uses all five speakers so the
sound envelopes the room.
The Pro Logic mode uses all five speakers so the
sound envelopes the room.
DOLBY 3 STEREO
The 3 Stereo mode uses the two main and one
center speaker.
The 3 Stereo mode uses the two main and one
center speaker.
receiver controls & operations
HALL
The Hall mode recreates the effect of listening to a
concert or watching a play from inside a music
hall. It utilizes the main and surround speakers.
The Hall mode recreates the effect of listening to a
concert or watching a play from inside a music
hall. It utilizes the main and surround speakers.
BYPASS
The Bypass mode utilizes just the main speakers.
The Bypass mode utilizes just the main speakers.
MASTER VOLUME
The Master Volume dial allows you to adjust the level
of audio output.
The Master Volume dial allows you to adjust the level
of audio output.
PHONES
The receiver has been equipped with a Phones jack.
Plug your headphones - not included - into the jack
and listen to your favorite media in private.
The receiver has been equipped with a Phones jack.
Plug your headphones - not included - into the jack
and listen to your favorite media in private.
Tuning the Receiver
1.
Push the FM/AM button on the receiver (or the
AM•FM button on the remote) to activate the
tuner.
AM•FM button on the remote) to activate the
tuner.
2.
Press the FM/AM button on the receiver (or the
AM•FM button on the remote) again to select the
FM or AM band.
AM•FM button on the remote) again to select the
FM or AM band.
Tuning
Press the FF on your remote button to move up the AM
or FM band.
or FM band.
Press the REW button on your remote to move down
the AM or FM band.
the AM or FM band.
DISPLAY MESSAGES
The following is an example of all the display messages you may encounter while using your receiver. Specific
messages are referenced within the section(s) they apply.
messages are referenced within the section(s) they apply.
STEREO
MEMORY
MUTE
PRESET
MHz
kHz
kHz
mS
dB
ch
dB
ch
SPEAKERS OFF
BYPASS
FM
AM
AM
TUNED
AUTO
DELAY
TIME
REAR
CENTER
DELAY
TIME
REAR
CENTER
DOLBY SURROUND
P R O • L O G I C
DOLBY 3 STEREO
CENTER MODE
NORMAL WIDE PHANTOM
HALL
Auto Tuning
Use the AUTO feature to automatically search for
stations of sufficient strength.
stations of sufficient strength.
Press AUTO on your receiver (or the INPUT•SEEK
button on your remote) to put the receiver into AUTO
mode. “AUTO” appears in the display. Press TUNING
up or down button on the receiver to search. The tuner
finds and stops on the next station whose frequency is
strong enough to be received. To continue the search,
press TUNING up or down button again.
button on your remote) to put the receiver into AUTO
mode. “AUTO” appears in the display. Press TUNING
up or down button on the receiver to search. The tuner
finds and stops on the next station whose frequency is
strong enough to be received. To continue the search,
press TUNING up or down button again.
Storing Stations in Memory
You can store up to 30 AM and FM stations. These
stations can be stored in random order.
stations can be stored in random order.