Справочник Пользователя для Pioneer VSX-819H-S
Listening to your system
05
40
En
a. You can change the MIDNIGHT/LOUDNESS options at any time by using MIDNIGHT button.
b. You can change the Sound Retriever feature at any time by using S.RETRIEVER button.
c. WMA and MP3 playback available only via iPod/USB input.
c. WMA and MP3 playback available only via iPod/USB input.
d. This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.
e. The initial set AUTO is only available for Dolby TrueHD signals. Select MAX or MID for signals other than
Dolby TrueHD.
f. This feature is only available when the connected display supports the automatic audio/video synchronizing
capability (‘lip-sync’) for HDMI. If you find the automatically set delay time unsuitable, set
A.DLY to OFF and
adjust the delay time manually. For more details about the lip-sync feature of your display, contact the
manufacturer directly.
manufacturer directly.
g. Only available with 2-channel sources in DOLBY PLII MUSIC mode.
h. Only when listening to 2-channel sources in NEO:6 CINEMA and NEO:6 MUSIC mode.
DRC
(Dynamic Range
Control)
(Dynamic Range
Control)
Adjusts the level of dynamic range for movie soundtracks
optimized for Dolby Digital, DTS, Dolby Digital Plus, Dolby
TrueHD, DTS-HD and DTS Master Audio (you may need to
use this feature when listening to surround sound at low
volumes).
optimized for Dolby Digital, DTS, Dolby Digital Plus, Dolby
TrueHD, DTS-HD and DTS Master Audio (you may need to
use this feature when listening to surround sound at low
volumes).
AUTO
e
MAX
MID
OFF
LFE ATT
(LFE Attenuate)
(LFE Attenuate)
Some Dolby Digital and DTS audio sources include ultra-
low bass tones. Set the LFE attenuator as necessary to
prevent the ultra-low bass tones from distorting the sound
from the speakers.
The LFE is not limited when set to 0 dB, which is the
recommended value. When set to –10 dB, the LFE is
limited by the respective degree. When OFF is selected, no
sound is output from the LFE channel.
low bass tones. Set the LFE attenuator as necessary to
prevent the ultra-low bass tones from distorting the sound
from the speakers.
The LFE is not limited when set to 0 dB, which is the
recommended value. When set to –10 dB, the LFE is
limited by the respective degree. When OFF is selected, no
sound is output from the LFE channel.
LFEATT 0 (0 dB)
LFEATT 10 (–10 dB)/
LFEATT ** (OFF)
HDMI
(HDMI Audio)
(HDMI Audio)
Specifies the routing of the HDMI audio signal out of this
receiver (amp) or through to a TV or flat screen TV. When
THRU is selected, no sound is output from this receiver.
receiver (amp) or through to a TV or flat screen TV. When
THRU is selected, no sound is output from this receiver.
AMP
THRU
A.DLY
(Auto Delay)
(Auto Delay)
This feature automatically corrects the audio-to-video delay
between components connected with an HDMI cable. The
audio delay time is set depending on the operational status
of the display connected with an HDMI cable. The video
delay time is automatically adjusted according to the audio
delay time.
between components connected with an HDMI cable. The
audio delay time is set depending on the operational status
of the display connected with an HDMI cable. The video
delay time is automatically adjusted according to the audio
delay time.
f
OFF
ON
C.WIDTH
g
(Center Width)
(Applicable only when
using a center speaker)
(Applicable only when
using a center speaker)
Spreads the center channel between the front right and left
speakers, making it sound wider (higher settings) or
narrower (lower settings).
speakers, making it sound wider (higher settings) or
narrower (lower settings).
0 to 7
Default:
3
DIMEN.
g
(Dimension)
Adjusts the surround sound balance from front to back,
making the sound more distant (minus settings), or more
forward (positive settings).
making the sound more distant (minus settings), or more
forward (positive settings).
–3 to +3
Default:
0
PNRM.
g
(Panorama)
Extends the front stereo image to include surround
speakers for a ‘wraparound’ effect.
speakers for a ‘wraparound’ effect.
OFF
ON
C.IMG
h
(Center image)
(Applicable only when
using a center speaker)
(Applicable only when
using a center speaker)
Adjust the center image to create a wider stereo effect with
vocals. Adjust the effect from
vocals. Adjust the effect from
0
(all center channel sent to front
right and left speakers) to
10
(center channel sent to the center
speaker only).
0 to 10
Default:
3
(NEO:6 MUSIC),
10 (NEO:6 CINEMA)
Setting
What it does
Option(s)
VSX-819H_RLF.book 40 ページ ２００９年１月２０日 火曜日 午前１０時３６分