Справочник Пользователя для Pioneer VSX-D3S
<
ARB7050
>
18
RECORDING WITH A CASSETTE DECK
RECORDING WITH TAPE 1
If the TAPE 2 MONITOR button is on, press to turn off.
USING VCR 1, VCR 2 FOR AUDIO RECORDING
The audio signal output from the VCR 1 and VCR 2 AUDIO OUT
jacks is the same as that output from the TAPE 1 REC jacks, so
you can record using the same procedure as for recording with
TAPE 1.
jacks is the same as that output from the TAPE 1 REC jacks, so
you can record using the same procedure as for recording with
TAPE 1.
COPYING TAPES
The following operations concern TAPE 1 to TAPE 2 copying.
1. Press the TAPE 1 input selector button.
2. Load the TAPE 1 cassette deck with a tape to playback.
3. Load the TAPE 2 cassette deck with a tape to record to.
4. Start recording on the TAPE 2 cassette deck.
5. Start playback on the TAPE 1 cassette deck.
1. Press the TAPE 1 input selector button.
2. Load the TAPE 1 cassette deck with a tape to playback.
3. Load the TAPE 2 cassette deck with a tape to record to.
4. Start recording on the TAPE 2 cassette deck.
5. Start playback on the TAPE 1 cassette deck.
The following operations concern TAPE 2 to TAPE 1 copying.
1. Select a source other than TAPE 1 with the input selector
1. Select a source other than TAPE 1 with the input selector
buttons.
2. Press the TAPE 2 MONITOR button to turn it on.
3. Load the TAPE 2 cassette deck with a tape to playback.
4. Load the TAPE 1 cassette deck with a tape to record to.
5. Start recording on the TAPE 1 cassette deck.
6. Start playback on the TAPE 2 cassette deck.
3. Load the TAPE 2 cassette deck with a tape to playback.
4. Load the TAPE 1 cassette deck with a tape to record to.
5. Start recording on the TAPE 1 cassette deck.
6. Start playback on the TAPE 2 cassette deck.
Tape monitoring
When recording is performed on a cassette deck equipped with
a monitoring function, the recorded sound can be monitored
through the speaker system by pressing the TAPE 2 MONITOR
button to ON.
a monitoring function, the recorded sound can be monitored
through the speaker system by pressing the TAPE 2 MONITOR
button to ON.
1. Select the source you want to record from with the input
selector buttons.
When recording AM or FM broadcasts, select a preset station
using the MULTI-JOG. If the desired station has not been
preset, tune in the station.
When recording AM or FM broadcasts, select a preset station
using the MULTI-JOG. If the desired station has not been
preset, tune in the station.
2. Start recording on TAPE 1 cassette deck.
3. Play the desired program source (record, compact disc, etc.).
3. Play the desired program source (record, compact disc, etc.).
The volume, balance and tone controls have no effect on the
recording.
recording.
RECORDING WITH TAPE 2
1. Select the source you want to record from with the input
selector buttons.
2. Start recording on the TAPE 2 cassette deck.
3. Play the desired program source (record, compact disc, etc.).
3. Play the desired program source (record, compact disc, etc.).
The volume, balance and tone controls have no effect on the
recording.
recording.
TAPE 2 MONITOR
1
1