Справочник Пользователя для Sony STR-DN2010

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

Press 

V/v repeatedly to select “Cancel”, then 

press 

 in step 3.

Press 

V/v repeatedly to select the 

controller you want to remove from the 
list, then press 

 to check the box.

Press 

V/v repeatedly to select 

“Remove All”, then press 

.

Up to 10 network controllers that have attempted to 
access the receiver are listed, and each of them can 
control the receiver.

Lets you assign a device name to the receiver 
up to 20 characters displayed as being on the 
home network.

Press 

V/v repeatedly to select “Device 

Name”, then press 

.

Press .
The soft keyboard appears on the TV 
screen.

Press 

V/v/B/b and 

 to select a 

character one by one to enter the 
device name.

Press 

V/v/B/b repeatedly to select 

“Finish”, then press 

.

When the setting is applied to the receiver, 
the receiver will restart automatically.

The default device name is “STR-DN2010”.

Lets you enter the Rhapsody Account to listen 
to the Rhapsody Internet radio service. For 
details, see “Setting an account” (page 83). 
Rhapsody is only available in the U.S.

Lets you turn the function that activates the 
switching hubs on the rear of the receiver and 
allows external control devices to control the 
receiver on or off even when the receiver is in 
standby mode.

x OFF

The network function turns off when the 
receiver is in standby mode.

x ON

The network function works even when the 
receiver is in standby mode.
In addition, the start-up time of the network 
function is reduced after the receiver is turned 
on.

When the receiver is in standby mode, 

 

“A. STANDBY” appears on the display if “Network 
Standby” is set to “ON”.