Справочник Пользователя для Sound Performance Lab 2273
GainStation 1
9
Again, while the GainStation 1‘s housing is EMV-proof and
protects against HF-interference, placement of the unit is very
important since it amplifies microphone signals as well as other
unwanted signals. Before connecting the GainStation 1 or any
other equipment turn off all power.
protects against HF-interference, placement of the unit is very
important since it amplifies microphone signals as well as other
unwanted signals. Before connecting the GainStation 1 or any
other equipment turn off all power.
IMPORTANT: Adjust the voltage setting on the back so that it
corresponds with the power conditions.
corresponds with the power conditions.
The following graph shows the correct wiring for connecting
unbalanced signals to the balanced XLR connectors:
unbalanced signals to the balanced XLR connectors:
The HI-Z/Line Input connector is designed for unbalanced
signals only.
signals only.
The TRS output connector (see „Analog Outputs“, page 10) can
be operated both with balanced and unbalanced wiring. Simply
use a mono 1/4" plug for unbalanced operation.
be operated both with balanced and unbalanced wiring. Simply
use a mono 1/4" plug for unbalanced operation.
Rear panel/connections
General advices
Output
balanced
unbalanced
1=GND
2 =hot (+)
3 =cold (-)
2 =hot (+)
3 =cold (-)
1
2
3
1
2
3
230 V – 50 Hz/315
mA
115 V – 60 Hz/630
mA
VOLTAGE/FUSE