Справочник Пользователя для Rockford Fosgate 125.2
– 28 –
Noise is radiating into RCA
signal cable.
signal cable.
Bad component in the sig-
nal chain.
nal chain.
Noise is radiating into
speaker cables.
speaker cables.
Multiple grounds in the
audio system.
audio system.
Ground loop between source
unit and antenna.
unit and antenna.
Engine Noise
Symptom
Diagnosis
Remedy
Check connections, run the
RCA cables on a different route
away from sources of high
current.
RCA cables on a different route
away from sources of high
current.
Check connections, bypass
additional components (cross-
overs and equalizers) between
the source unit and the ampli-
fier. Connect one component
at a time to determine the
culprit. Repair or replace com-
ponents as necessary.
additional components (cross-
overs and equalizers) between
the source unit and the ampli-
fier. Connect one component
at a time to determine the
culprit. Repair or replace com-
ponents as necessary.
Disconnect existing speakers
and connect a test speaker to
the output terminals of the
amplifier. If noise is gone, re-
route the speaker cables away
from sources of high voltage.
and connect a test speaker to
the output terminals of the
amplifier. If noise is gone, re-
route the speaker cables away
from sources of high voltage.
Check ground connections and
connect amplifiers, signal pro-
cessors, and other components
to a central location or try a
different grounding point on
the chassis.
connect amplifiers, signal pro-
cessors, and other components
to a central location or try a
different grounding point on
the chassis.
Check connections, disconnect
antenna from source unit. If
noise is gone, install an an-
tenna ground loop isolator.
antenna from source unit. If
noise is gone, install an an-
tenna ground loop isolator.
• If noise persists, see your Authorized Rockford Fosgate Dealer.
TROUBLE- S
H
O
O
O
O
T
I
N
G
G